diff --git a/.envrc b/.envrc
new file mode 100644
index 0000000..3550a30
--- /dev/null
+++ b/.envrc
@@ -0,0 +1 @@
+use flake
diff --git a/.gitattributes b/.gitattributes
new file mode 100644
index 0000000..5c1c87e
--- /dev/null
+++ b/.gitattributes
@@ -0,0 +1 @@
+* linguist-language=HolyC
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..2bbdbfe
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,2 @@
+.direnv
+result
diff --git a/README.md b/README.md
index b1e3b8d..ac50f50 100644
--- a/README.md
+++ b/README.md
@@ -1,11 +1,10 @@
-# ❄️ NixOS dotfiles
+# Jet's NixOS config
 
-*My configuration files for NixOS. Feel free to look around and copy!* 
+I've done NixOS a few times, but this round has been very comfortable. Nothing is really that special about it, but feel free to copy it!
 
-# Special thanks to:
-- [Sioodmy's dotfiles](https://github.com/sioodmy/dotfiles)
-- [Syndrizzle's dotfiles](https://github.com/syndrizzle/hotfiles)
-- [Javacafe01's dotfiles](https://github.com/javacafe01/dotfiles)
-- [Siduck76's NvChad](https://github.com/siduck76/nvchad/)
-- [NixOS Manual](https://nixos.org/manual/nixos/stable/)
-- [Epsyle's NixOS Dotfiles](https://github.com/epsyle/snowflake/)
\ No newline at end of file
+> silly language thing credited to https://github.com/SylvanFranklin/.config
+
+This flake currently defines one host: `framework` which is my laptop.
+
+- system config lives in `configuration.nix`
+- Home Manager config lives in `home.nix`
diff --git a/configuration.nix b/configuration.nix
new file mode 100644
index 0000000..20a20ab
--- /dev/null
+++ b/configuration.nix
@@ -0,0 +1,310 @@
+{ config, pkgs, ... }:
+
+{
+  imports = [ ./hardware-configuration.nix ];
+
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.systemd-boot.configurationLimit = 3;
+  boot.loader.efi.canTouchEfiVariables = true;
+  boot.loader.timeout = 1;
+  boot.loader.systemd-boot.consoleMode = "max";
+  boot.binfmt.emulatedSystems = [ "aarch64-linux" ];
+
+  networking.hostName = "framework";
+
+  # Ensure current wireless firmware is available.
+  hardware.enableRedistributableFirmware = true;
+
+  hardware.bluetooth = {
+    enable = true;
+    powerOnBoot = true;
+    settings = {
+      General = {
+        Experimental = true; # Show battery charge of Bluetooth devices
+      };
+    };
+  };
+
+  networking.networkmanager.enable = true;
+  networking.networkmanager.settings = {
+    connection = {
+      "wifi.powersave" = 2;
+    };
+    device = {
+      "wifi.scan-rand-mac-address" = false;
+    };
+  };
+
+  services.resolved.enable = true;
+
+  networking.firewall.enable = true;
+  # Required for Tailscale
+  networking.firewall.checkReversePath = "loose";
+  networking.firewall.interfaces."tailscale0".allowedTCPPorts = [ 4096 ];
+
+  services.tailscale = {
+    enable = true;
+  };
+
+  systemd.services.tailscale-set-operator = {
+    description = "Set Tailscale operator user";
+    after = [ "tailscaled.service" ];
+    requires = [ "tailscaled.service" ];
+    wantedBy = [ "multi-user.target" ];
+    serviceConfig.Type = "oneshot";
+    path = [ pkgs.tailscale ];
+    script = ''
+      tailscale set --operator=jet
+    '';
+  };
+
+  time.timeZone = "America/Los_Angeles";
+  i18n.defaultLocale = "en_US.UTF-8";
+
+  # Framework Laptop 13 AMD AI 300 Series specific configurations
+  # Enable AMD GPU support and power management
+  hardware.graphics = {
+    enable = true;
+    enable32Bit = true;
+  };
+
+  # Enable keyd for key remapping
+  services.keyd = {
+    enable = true;
+    keyboards = {
+      default = {
+        ids = [ "*" ]; # Apply to all keyboards
+        settings = {
+          main = {
+            capslock = "esc";
+            esc = "capslock";
+            leftalt = "leftcontrol";
+            leftcontrol = "leftalt";
+            mute = "mute"; # ← Key 1: mute
+            volumedown = "playpause"; # ← Key 2: play/pause
+            volumeup = "volumedown"; # ← Key 3: vol down
+            previoussong = "volumeup"; # ← Key 4: vol up
+            playpause = "command(touch /tmp/keyd-f5-test)"; # ← Key 5: lock screen (testing)
+            nextsong = "noop"; # ← Key 6: disabled
+            brightnessdown = "noop"; # ← Key 7: disabled
+            brightnessup = "noop"; # ← Key 8: disabled
+            # Key 9: display toggle (leftmeta+p) - disabled below
+            rfkill = "brightnessdown"; # ← Key 10: brightness down
+            sysrq = "brightnessup"; # ← Key 11: brightness up
+            media = "sysrq"; # ← Key 12: screenshot
+          };
+        };
+      };
+      frameworkRadio = {
+        ids = [ "32ac:0006" ];
+        settings = {
+          main = {
+            brightnessdown = "noop"; # ← Key 7: disabled
+            brightnessup = "noop"; # ← Key 8: disabled
+            rfkill = "brightnessdown"; # ← Key 10: brightness down
+          };
+        };
+      };
+    };
+  };
+
+  # Prevent trackpad interference with keyd
+  environment.etc."libinput/local-overrides.quirks".text = ''
+    [Serial Keyboards]
+    MatchUdevType=keyboard
+    MatchName=keyd virtual keyboard
+    AttrKeyboardIntegration=internal
+  '';
+
+  # Codex currently probes the conventional FHS bubblewrap path.
+  systemd.tmpfiles.rules = [
+    "L+ /usr/bin/bwrap - - - - ${pkgs.bubblewrap}/bin/bwrap"
+  ];
+
+  # Set Kitty as default terminal
+  xdg.terminal-exec = {
+    enable = true;
+    settings = {
+      default = [ "kitty.desktop" ];
+    };
+  };
+
+  services.flatpak.enable = true;
+
+  virtualisation.docker.enable = true;
+
+  services.displayManager.gdm.enable = true;
+  services.desktopManager.gnome.enable = true;
+  services.gnome.sushi.enable = true;
+
+  # Remove default GNOME apps (keeping loupe and file-roller)
+  environment.gnome.excludePackages = with pkgs; [
+    epiphany # GNOME Web
+    gnome-calculator
+    gnome-calendar
+    gnome-characters
+    gnome-clocks
+    gnome-connections
+    gnome-console
+    gnome-contacts
+    gnome-maps
+    gnome-music
+    gnome-weather
+    snapshot # Camera
+    gnome-text-editor
+    simple-scan
+    totem # Videos (have VLC)
+    yelp # Help docs
+    evince # PDF viewer (using Zen Browser)
+    geary # Email
+    gnome-tour
+    gnome-font-viewer # Have font-manager
+  ];
+
+  services.printing.enable = true;
+
+  services.pulseaudio.enable = false;
+  security.rtkit.enable = true;
+  services.pipewire = {
+    enable = true;
+    alsa.enable = true;
+    alsa.support32Bit = true;
+    pulse.enable = true;
+  };
+  users.users.jet = {
+    isNormalUser = true;
+    description = "Jet";
+    extraGroups = [
+      "networkmanager"
+      "wheel"
+      "video"
+      "render"
+      "docker"
+    ];
+  };
+
+  nixpkgs.config.allowUnfree = true;
+  nix.settings = {
+    experimental-features = [
+      "nix-command"
+      "flakes"
+    ];
+    trusted-users = [
+      "root"
+      "jet"
+    ];
+    max-jobs = "auto";
+    cores = 0;
+    build-users-group = "nixbld";
+  };
+  nix.gc = {
+    automatic = true;
+    dates = "daily";
+    options = "--delete-older-than 7d";
+  };
+  nix.optimise.automatic = true;
+
+  # Framework-specific services
+  # Enable fwupd for BIOS updates (distributed through LVFS)
+  services.fwupd.enable = true;
+
+  # Enable periodic TRIM for NVMe/SSD health
+  services.fstrim.enable = true;
+  services.irqbalance.enable = true;
+  services.earlyoom.enable = true;
+
+  # Power management for laptop
+  services.logind = {
+    settings = {
+      Login = {
+        HandleLidSwitch = "suspend";
+        HandleLidSwitchExternalPower = "suspend";
+        HandleLidSwitchDocked = "ignore";
+        HandlePowerKey = "suspend";
+      };
+    };
+  };
+
+  # Enable auto-cpufreq for intelligent power management (replaces TLP)
+  services.auto-cpufreq.enable = true;
+  services.auto-cpufreq.settings = {
+    battery = {
+      governor = "powersave";
+      turbo = "never";
+    };
+    charger = {
+      governor = "performance";
+      turbo = "auto";
+    };
+  };
+
+  # Disable power-profiles-daemon (conflicts with auto-cpufreq)
+  services.power-profiles-daemon.enable = false;
+
+  # Enable power management (governor managed dynamically by auto-cpufreq)
+  powerManagement.enable = true;
+
+  # v4l2loopback for OBS Virtual Camera
+  boot.extraModulePackages = with config.boot.kernelPackages; [ v4l2loopback ];
+  boot.kernelModules = [ "v4l2loopback" ];
+  boot.extraModprobeConfig = ''
+    options cfg80211 ieee80211_regdom=US
+    options v4l2loopback devices=1 video_nr=1 card_label="OBS Virtual Camera" exclusive_caps=1
+  '';
+
+  # RAM optimizations for 96GB system
+  boot.kernel.sysctl = {
+    "vm.vfs_cache_pressure" = 50; # Keep more filesystem cache in RAM
+    "vm.dirty_ratio" = 15; # Write to disk when 15% of RAM is dirty
+    "vm.dirty_background_ratio" = 5; # Start writing when 5% dirty
+    "kernel.nmi_watchdog" = 0;
+    "net.core.default_qdisc" = "fq";
+    "net.ipv4.tcp_congestion_control" = "bbr";
+  };
+
+  # Use RAM disk (tmpfs) for temporary files - much faster than disk
+  fileSystems."/tmp" = {
+    device = "tmpfs";
+    fsType = "tmpfs";
+    options = [
+      "size=32G" # Use up to 32GB RAM for /tmp (adjust as needed)
+      "mode=1777"
+      "nosuid"
+      "nodev"
+    ];
+  };
+
+  environment.systemPackages = with pkgs; [
+    bubblewrap
+    docker
+    docker-compose
+    flatpak
+    wget
+    nh
+  ];
+
+  programs.steam.enable = true;
+  programs.nix-index-database.comma.enable = true;
+
+  # https://wiki.nixos.org/wiki/Appimage
+  programs.appimage = {
+    enable = true;
+    binfmt = true;
+  };
+
+  # GameCube adapter udev rules for Slippi/Dolphin
+  # Disable USB autosuspend for Framework's problematic devices (fingerprint reader, USB-C hub)
+  services.udev.extraRules = ''
+    # GameCube adapter USB device (vendor ID 057e, product ID 0337)
+    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTRS{idVendor}=="057e", ATTRS{idProduct}=="0337", MODE="0666"
+    # GameCube adapter HID device (needed for Dolphin to access controllers)
+    KERNEL=="hidraw*", ATTRS{idVendor}=="057e", ATTRS{idProduct}=="0337", MODE="0666", GROUP="input"
+    # Disable autosuspend for Framework fingerprint reader
+    ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="27a6", ATTR{power/autosuspend}="-1"
+    # Disable autosuspend for Framework USB-C hub controllers
+    ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="32ac", ATTR{power/autosuspend}="-1"
+  '';
+
+  system.stateVersion = "25.05";
+
+}
diff --git a/flake.lock b/flake.lock
index 78eb6ca..d30a65f 100644
--- a/flake.lock
+++ b/flake.lock
@@ -1,5 +1,26 @@
 {
   "nodes": {
+    "flake-parts": {
+      "inputs": {
+        "nixpkgs-lib": [
+          "nur",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1733312601,
+        "narHash": "sha256-4pDvzqnegAfRkPwO3wmwBhVi/Sye1mzps0zHWYnP88c=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "205b12d8b7cd4802fbcb8e8ef6a0f1408781a4f9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
     "home-manager": {
       "inputs": {
         "nixpkgs": [
@@ -7,11 +28,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1711133180,
-        "narHash": "sha256-WJOahf+6115+GMl3wUfURu8fszuNeJLv9qAWFQl3Vmo=",
+        "lastModified": 1776373306,
+        "narHash": "sha256-iAJIzHngGZeLIkjzuuWI6VBsYJ1n89a/Esq0m8R1vjs=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "1c2c5e4cabba4c43504ef0f8cc3f3dfa284e2dbb",
+        "rev": "d401492e2acd4fea42f7705a3c266cea739c9c36",
         "type": "github"
       },
       "original": {
@@ -20,13 +41,54 @@
         "type": "github"
       }
     },
+    "home-manager_2": {
+      "inputs": {
+        "nixpkgs": [
+          "zen-browser",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1774991950,
+        "narHash": "sha256-kScKj3qJDIWuN9/6PMmgy5esrTUkYinrO5VvILik/zw=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "f2d3e04e278422c7379e067e323734f3e8c585a7",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "nix-index-database": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1775970782,
+        "narHash": "sha256-7jt9Vpm48Yy5yAWigYpde+HxtYEpEuyzIQJF4VYehhk=",
+        "owner": "nix-community",
+        "repo": "nix-index-database",
+        "rev": "bedba5989b04614fc598af9633033b95a937933f",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "nix-index-database",
+        "type": "github"
+      }
+    },
     "nixos-hardware": {
       "locked": {
-        "lastModified": 1710783728,
-        "narHash": "sha256-eIsfu3c9JUBgm3cURSKTXLEI9Dlk1azo+MWKZVqrmkc=",
+        "lastModified": 1775490113,
+        "narHash": "sha256-2ZBhDNZZwYkRmefK5XLOusCJHnoeKkoN95hoSGgMxWM=",
         "owner": "NixOS",
         "repo": "nixos-hardware",
-        "rev": "1e679b9a9970780cd5d4dfe755a74a8f96d33388",
+        "rev": "c775c2772ba56e906cbeb4e0b2db19079ef11ff7",
         "type": "github"
       },
       "original": {
@@ -37,24 +99,70 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1711001935,
-        "narHash": "sha256-URtGpHue7HHZK0mrHnSf8wJ6OmMKYSsoLmJybrOLFSQ=",
-        "owner": "NixOS",
+        "lastModified": 1776169885,
+        "narHash": "sha256-l/iNYDZ4bGOAFQY2q8y5OAfBBtrDAaPuRQqWaFHVRXM=",
+        "owner": "nixos",
         "repo": "nixpkgs",
-        "rev": "20f77aa09916374aa3141cbc605c955626762c9a",
+        "rev": "4bd9165a9165d7b5e33ae57f3eecbcb28fb231c9",
         "type": "github"
       },
       "original": {
-        "id": "nixpkgs",
+        "owner": "nixos",
         "ref": "nixos-unstable",
-        "type": "indirect"
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nur": {
+      "inputs": {
+        "flake-parts": "flake-parts",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1776374701,
+        "narHash": "sha256-4EKgvB6jcyMLpT3+sUjQ9yBRs8RF7GvPj0uuh6xU1zY=",
+        "owner": "nix-community",
+        "repo": "NUR",
+        "rev": "610dd2de6fb34e3f1213876cf556ab4991ddd6a9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "NUR",
+        "type": "github"
       }
     },
     "root": {
       "inputs": {
         "home-manager": "home-manager",
+        "nix-index-database": "nix-index-database",
         "nixos-hardware": "nixos-hardware",
-        "nixpkgs": "nixpkgs"
+        "nixpkgs": "nixpkgs",
+        "nur": "nur",
+        "zen-browser": "zen-browser"
+      }
+    },
+    "zen-browser": {
+      "inputs": {
+        "home-manager": "home-manager_2",
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1776317517,
+        "narHash": "sha256-JP1XVRabZquf7pnXvRUjp7DV+EBrB6Qmp3+vG3HMy/k=",
+        "owner": "0xc000022070",
+        "repo": "zen-browser-flake",
+        "rev": "0a7be59e988bb2cb452080f59aaabae70bc415ae",
+        "type": "github"
+      },
+      "original": {
+        "owner": "0xc000022070",
+        "repo": "zen-browser-flake",
+        "type": "github"
       }
     }
   },
diff --git a/flake.nix b/flake.nix
index 8559f43..066f5ad 100644
--- a/flake.nix
+++ b/flake.nix
@@ -1,59 +1,71 @@
 {
-  description = "Jet's Nix Config";
-
+  description = "flake for jet with Home Manager enabled";
+  # https://github.com/drakerossman/nixos-musings/blob/main/how-to-add-home-manager-to-nixos/flake.nix
   inputs = {
-	nixpkgs.url = "nixpkgs/nixos-unstable";
-	nixos-hardware.url = "github:NixOS/nixos-hardware";
-	home-manager = {
-		url = "github:nix-community/home-manager";
-		inputs.nixpkgs.follows = "nixpkgs";
-	};
+    nixpkgs.url = "github:nixos/nixpkgs/nixos-unstable";
+    home-manager.url = "github:nix-community/home-manager";
+    home-manager.inputs.nixpkgs.follows = "nixpkgs";
+    nixos-hardware.url = "github:NixOS/nixos-hardware";
+    zen-browser = {
+      url = "github:0xc000022070/zen-browser-flake";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    nix-index-database = {
+      url = "github:nix-community/nix-index-database";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+    nur = {
+      url = "github:nix-community/NUR";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
   };
 
-	# All outputs for the system (configs)
-	outputs = { home-manager, nixpkgs, nixos-hardware, ... }@inputs: 
-		let
-			system = "x86_64-linux"; #current system
-			pkgs = inputs.nixpkgs.legacyPackages.x86_64-linux;
-			lib = nixpkgs.lib;
+  outputs =
+    inputs@{
+      nixpkgs,
+      home-manager,
+      nixos-hardware,
+      ...
+    }:
+    {
+      formatter.x86_64-linux = nixpkgs.legacyPackages.x86_64-linux.nixfmt;
+      nixosConfigurations = {
+        framework = nixpkgs.lib.nixosSystem {
+          modules = [
+            { nixpkgs.hostPlatform = "x86_64-linux"; }
+            ./configuration.nix
+            nixos-hardware.nixosModules.framework-amd-ai-300-series
+            home-manager.nixosModules.home-manager
+            inputs.nix-index-database.nixosModules.default
+            {
+              home-manager.useGlobalPkgs = true;
+              home-manager.useUserPackages = true;
+              home-manager.backupFileExtension = "backup";
+              home-manager.extraSpecialArgs = { inherit inputs; };
+              home-manager.users.jet = import ./home.nix;
+            }
+            {
+              nixpkgs.overlays = [
+                inputs.nur.overlays.default
+              ];
+            }
+          ];
+        };
+      };
 
-			# This lets us reuse the code to "create" a system
-			# Credits go to sioodmy on this one!
-			# https://github.com/sioodmy/dotfiles/blob/main/flake.nix
-			mkSystem = pkgs: system: hostname:
-				let
-					hardwareConfig = {
-					"laptop" = nixos-hardware.nixosModules.lenovo-thinkpad-x1-6th-gen;
-					# Add other hostnames and their respective hardware configurations here
-					};
-				in
-				pkgs.lib.nixosSystem {
-					inherit system;
-					modules = [
-					{ networking.hostName = hostname; }
-					./modules/system/configuration.nix
-					(./. + "/hosts/${hostname}/hardware-configuration.nix")
-					(hardwareConfig.${hostname} or (lib.mkForce {})) # Import hardware configuration if exists for hostname
-					home-manager.nixosModules.home-manager
-					{
-						home-manager = {
-						useUserPackages = true;
-						useGlobalPkgs = true;
-						extraSpecialArgs = { inherit inputs; };
-						users.jet = (./. + "/hosts/${hostname}/user.nix");
-						};
-					}
-					];
-					specialArgs = { inherit inputs; };
-				};
-
-
-		in {
-			nixosConfigurations = {
-				# Now, defining a new system is can be done in one line
-				#                                Architecture   Hostname
-				laptop = mkSystem inputs.nixpkgs "x86_64-linux" "laptop";
-				#desktop = mkSystem inputs.nixpkgs "x86_64-linux" "desktop";
-			};
-	};
+      devShells.x86_64-linux.default =
+        let
+          pkgs = nixpkgs.legacyPackages.x86_64-linux;
+          nhs = pkgs.writeShellScriptBin "nhs" ''
+            sudo -v || exit $?
+            nh os switch --hostname framework path:. "$@"
+          '';
+        in
+        pkgs.mkShell {
+          packages = [
+            pkgs.nh
+            nhs
+          ];
+        };
+    };
 }
diff --git a/hardware-configuration.nix b/hardware-configuration.nix
new file mode 100644
index 0000000..20e36c0
--- /dev/null
+++ b/hardware-configuration.nix
@@ -0,0 +1,53 @@
+# Do not modify this file!  It was generated by ‘nixos-generate-config’
+# and may be overwritten by future invocations.  Please make changes
+# to /etc/nixos/configuration.nix instead.
+{
+  config,
+  lib,
+  pkgs,
+  modulesPath,
+  ...
+}:
+
+{
+  imports = [
+    (modulesPath + "/installer/scan/not-detected.nix")
+  ];
+
+  boot.initrd.availableKernelModules = [
+    "nvme"
+    "xhci_pci"
+    "thunderbolt"
+    "usb_storage"
+    "sd_mod"
+  ];
+  boot.initrd.kernelModules = [ ];
+  boot.kernelModules = [ "kvm-amd" ];
+  boot.extraModulePackages = [ ];
+
+  fileSystems."/" = {
+    device = "/dev/disk/by-uuid/687945b8-9e15-473d-b083-d3a3b12ac98f";
+    fsType = "ext4";
+    options = [ "noatime" ];
+  };
+
+  fileSystems."/boot" = {
+    device = "/dev/disk/by-uuid/407C-573B";
+    fsType = "vfat";
+    options = [
+      "fmask=0077"
+      "dmask=0077"
+    ];
+  };
+
+  swapDevices = [ ];
+
+  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
+  # (the default) this is the recommended approach. When using systemd-networkd it's
+  # still possible to use this option, but it's recommended to use it in conjunction
+  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
+  networking.useDHCP = lib.mkDefault true;
+  # networking.interfaces.wlp192s0.useDHCP = lib.mkDefault true;
+
+  hardware.cpu.amd.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
+}
diff --git a/home.nix b/home.nix
new file mode 100644
index 0000000..1a39fc8
--- /dev/null
+++ b/home.nix
@@ -0,0 +1,915 @@
+{
+  config,
+  pkgs,
+  inputs,
+  ...
+}:
+
+let
+  name = "Jet";
+  email = "jet@extremist.software";
+  sshSigningKey = "~/.ssh/id_ed25519.pub";
+  sshPublicKey = "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE40ISu3ydCqfdpb26JYD5cIN0Fu0id/FDS+xjB5zpqu";
+  zenStartup = pkgs.makeDesktopItem {
+    name = "zen-startup";
+    desktopName = "Zen Startup";
+    comment = "Launch Zen Browser";
+    exec = "${config.programs.zen-browser.package}/bin/zen-beta";
+    terminal = false;
+    categories = [ "Network" ];
+  };
+  kittyZellijStartup = pkgs.makeDesktopItem {
+    name = "kitty-zellij-startup";
+    desktopName = "Kitty Zellij Startup";
+    comment = "Open Kitty and attach to the main Zellij session";
+    exec = "${pkgs.kitty}/bin/kitty --start-as=fullscreen ${zellijPersistentSession}/bin/zellij-persistent-session";
+    terminal = false;
+    categories = [
+      "TerminalEmulator"
+    ];
+  };
+  vesktopStartup = pkgs.makeDesktopItem {
+    name = "vesktop-startup";
+    desktopName = "Vesktop Startup";
+    comment = "Launch Vesktop in fullscreen";
+    exec = "${pkgs.vesktop}/bin/vesktop --start-fullscreen";
+    terminal = false;
+    categories = [ "Network" ];
+  };
+  signalStartup = pkgs.makeDesktopItem {
+    name = "signal-startup";
+    desktopName = "Signal Startup";
+    comment = "Launch Signal in fullscreen";
+    exec = "${pkgs.signal-desktop}/bin/signal-desktop --start-fullscreen";
+    terminal = false;
+    categories = [ "Network" ];
+  };
+  betterbirdStartup = pkgs.makeDesktopItem {
+    name = "betterbird-startup";
+    desktopName = "Betterbird Startup";
+    comment = "Launch Betterbird in fullscreen";
+    exec = "${pkgs.flatpak}/bin/flatpak run eu.betterbird.Betterbird --fullscreen";
+    terminal = false;
+    categories = [ "Network" ];
+  };
+  zulipStartup = pkgs.makeDesktopItem {
+    name = "zulip-startup";
+    desktopName = "Zulip Startup";
+    comment = "Launch Zulip in fullscreen";
+    exec = "${pkgs.zulip}/bin/zulip --start-fullscreen";
+    terminal = false;
+    categories = [ "Network" ];
+  };
+  tailscaleQsExtension = pkgs.stdenvNoCC.mkDerivation {
+    pname = "tailscale-gnome-qs";
+    version = "5";
+    src = pkgs.fetchzip {
+      url = "https://github.com/tailscale-qs/tailscale-gnome-qs/archive/refs/tags/v5.tar.gz";
+      sha256 = "0b9jy8pyxvpkxf3adlwq42kii14jn5g7xyxggjzg87pb5jg4zfg2";
+    };
+    dontBuild = true;
+    installPhase = ''
+      mkdir -p "$out/share/gnome-shell/extensions"
+      cp -r "$src/tailscale-gnome-qs@tailscale-qs.github.io" \
+        "$out/share/gnome-shell/extensions/tailscale-gnome-qs@tailscale-qs.github.io"
+    '';
+  };
+  # opencode's native watcher binding needs libstdc++.so.6 on NixOS.
+  wrappedOpencode = pkgs.symlinkJoin {
+    name = "opencode-wrapped";
+    paths = [ pkgs.opencode ];
+    nativeBuildInputs = [ pkgs.makeWrapper ];
+    postBuild = ''
+      wrapProgram "$out/bin/opencode" \
+        --prefix LD_LIBRARY_PATH : "${pkgs.lib.makeLibraryPath [ pkgs.stdenv.cc.cc.lib ]}"
+    '';
+  };
+  nasaApodWallpaper = pkgs.writeShellApplication {
+    name = "nasa-apod-wallpaper";
+    runtimeInputs = [
+      pkgs.coreutils
+      pkgs.curl
+      pkgs.glib
+      pkgs.jq
+    ];
+    text = ''
+      set -euo pipefail
+
+      state_dir="${config.home.homeDirectory}/.local/state/nasa-apod"
+      current_link="$state_dir/current"
+      mkdir -p "$state_dir"
+      curl_args=(
+        --fail
+        --silent
+        --show-error
+        --location
+        --retry 30
+        --retry-all-errors
+        --retry-delay 2
+        --connect-timeout 10
+        --max-time 300
+      )
+
+      set_wallpaper() {
+        local target="$1"
+
+        gsettings set org.gnome.desktop.background picture-uri "file://$target"
+        gsettings set org.gnome.desktop.background picture-uri-dark "file://$target"
+        gsettings set org.gnome.desktop.background picture-options 'zoom'
+      }
+
+      json="$(curl "''${curl_args[@]}" 'https://api.nasa.gov/planetary/apod?api_key=DEMO_KEY' || true)"
+      if [ -z "$json" ]; then
+        exit 0
+      fi
+
+      media_type="$(printf '%s' "$json" | jq -r '.media_type // empty')"
+
+      if [ "$media_type" != "image" ]; then
+        exit 0
+      fi
+
+      image_url="$(printf '%s' "$json" | jq -r '.hdurl // .url // empty')"
+      if [ -z "$image_url" ]; then
+        exit 0
+      fi
+
+      ext="''${image_url##*.}"
+      ext="''${ext%%\?*}"
+      if [ -z "$ext" ] || [ "$ext" = "$image_url" ]; then
+        ext="jpg"
+      fi
+
+      date_stamp="$(printf '%s' "$json" | jq -r '.date // empty')"
+      if [ -z "$date_stamp" ]; then
+        date_stamp="$(date +%F)"
+      fi
+
+      target="$state_dir/apod-$date_stamp.$ext"
+      tmp="$target.tmp"
+
+      if curl "''${curl_args[@]}" "$image_url" -o "$tmp" && [ -s "$tmp" ]; then
+        mv "$tmp" "$target"
+        ln -sfn "$target" "$current_link"
+        set_wallpaper "$target"
+      else
+        rm -f "$tmp"
+      fi
+    '';
+  };
+  zellijNewTabZoxide = pkgs.writeShellApplication {
+    name = "zellij-new-tab-zoxide";
+    runtimeInputs = [
+      pkgs.coreutils
+      pkgs.fzf
+      pkgs.zellij
+      pkgs.zoxide
+    ];
+    text = ''
+      set -euo pipefail
+
+      dirs="$(${pkgs.zoxide}/bin/zoxide query -l | while IFS= read -r dir; do
+        if [ -d "$dir" ]; then
+          printf '%s\t%s\n' "$(${pkgs.coreutils}/bin/basename "$dir")" "$dir"
+        fi
+      done)"
+
+      if [ -z "$dirs" ]; then
+        if [ -n "''${ZELLIJ:-}" ]; then
+          exec ${pkgs.bashInteractive}/bin/bash -i
+        fi
+        exit 1
+      fi
+
+      dir="$(printf '%s\n' "$dirs" | ${pkgs.fzf}/bin/fzf \
+        --delimiter='\t' \
+        --with-nth='2' \
+        --nth='1' \
+        --height='40%' \
+        --layout='reverse' \
+        --border \
+        --prompt='dir> ' \
+        --exit-0 | ${pkgs.coreutils}/bin/cut -f2-)"
+
+      if [ -z "$dir" ]; then
+        if [ -n "''${ZELLIJ:-}" ]; then
+          ${pkgs.zellij}/bin/zellij action close-tab >/dev/null 2>&1 || true
+          exit 0
+        fi
+        exit 1
+      fi
+
+      tab_name="$(${pkgs.coreutils}/bin/basename "$dir")"
+      if [ "$dir" = "/" ]; then
+        tab_name="/"
+      fi
+
+      cd "$dir"
+
+      escape_kdl() {
+        local value="$1"
+        value="''${value//\\/\\\\}"
+        value="''${value//\"/\\\"}"
+        printf '%s' "$value"
+      }
+
+      if [ -n "''${ZELLIJ:-}" ]; then
+        ${pkgs.zellij}/bin/zellij action rename-tab "$tab_name" >/dev/null 2>&1 || true
+      fi
+
+      if [ -n "''${ZELLIJ:-}" ]; then
+        exec ${pkgs.bashInteractive}/bin/bash -i
+      fi
+
+      layout_file="${config.home.homeDirectory}/.local/state/zellij-launch-layout.kdl"
+      mkdir -p "$(dirname "$layout_file")"
+      printf '%s\n' \
+        'layout {' \
+        "  tab name=\"$(escape_kdl "$tab_name")\" cwd=\"$(escape_kdl "$dir")\" {" \
+        '    pane focus=true' \
+        '    pane size=1 borderless=true {' \
+        '      plugin location="compact-bar"' \
+        '    }' \
+        '  }' \
+        '}' > "$layout_file"
+
+      exec ${pkgs.zellij}/bin/zellij -l "$layout_file"
+    '';
+  };
+  zellijPersistentSession = pkgs.writeShellApplication {
+    name = "zellij-persistent-session";
+    runtimeInputs = [ pkgs.zellij ];
+    text = ''
+      set -euo pipefail
+
+      while true; do
+        if ${pkgs.zellij}/bin/zellij attach --create main --force-run-commands; then
+          if ! ${zellijNewTabZoxide}/bin/zellij-new-tab-zoxide; then
+            exec ${pkgs.bashInteractive}/bin/bash -i
+          fi
+        else
+          exit $?
+        fi
+      done
+    '';
+  };
+  zellijSyncTabName = pkgs.writeShellApplication {
+    name = "zellij-sync-tab-name";
+    runtimeInputs = [
+      pkgs.coreutils
+      pkgs.jq
+      pkgs.zellij
+    ];
+    text = ''
+      set -euo pipefail
+
+      if [ -z "''${ZELLIJ:-}" ]; then
+        exit 0
+      fi
+
+      current_tab_info="$(${pkgs.zellij}/bin/zellij action current-tab-info --json 2>/dev/null)"
+      current_tab_id="$(printf '%s\n' "$current_tab_info" | ${pkgs.jq}/bin/jq -r '.tab_id // empty')"
+      current_tab_name="$(printf '%s\n' "$current_tab_info" | ${pkgs.jq}/bin/jq -r '.name // empty')"
+
+      if [ -z "$current_tab_id" ]; then
+        exit 0
+      fi
+
+      next_tab_name="$(${pkgs.zellij}/bin/zellij action list-panes --json 2>/dev/null | ${pkgs.jq}/bin/jq -r --argjson tab_id "$current_tab_id" '
+        [ .[]
+          | select((.is_plugin | not) and .tab_id == $tab_id)
+          | .pane_cwd // empty
+          | if . == "/" then "/" else split("/") | map(select(length > 0)) | last end
+        ]
+        | reduce .[] as $name ([]; if index($name) == null then . + [$name] else . end)
+        | join("-")
+      ' 2>/dev/null)"
+
+      if [ -z "$next_tab_name" ] || [ "$next_tab_name" = "$current_tab_name" ]; then
+        exit 0
+      fi
+
+      exec ${pkgs.zellij}/bin/zellij action rename-tab "$next_tab_name"
+    '';
+  };
+in
+{
+  imports = [ inputs.zen-browser.homeModules.default ];
+
+  home.username = "jet";
+  home.homeDirectory = "/home/jet";
+  home.stateVersion = "25.05";
+
+  # Configure GNOME settings
+  dconf.settings = {
+    "org/gnome/desktop/interface" = {
+      clock-format = "12h";
+      clock-show-weekday = true;
+      color-scheme = "prefer-dark";
+      enable-animations = false;
+      enable-hot-corners = false;
+    };
+    "org/gnome/system/location" = {
+      enabled = true;
+    };
+    "org/gnome/settings-daemon/plugins/power" = {
+      sleep-inactive-ac-type = "nothing";
+    };
+    "org/gtk/gtk4/settings/file-chooser" = {
+      show-hidden = true;
+    };
+    "org/gtk/settings/file-chooser" = {
+      clock-format = "12h";
+      show-hidden = true;
+    };
+    "org/gnome/desktop/peripherals/touchpad" = {
+      disable-while-typing = false;
+    };
+    "org/gnome/shell" = {
+      disable-user-extensions = false;
+      enabled-extensions = [
+        "hidetopbar@mathieu.bidon.ca"
+        "wifiqrcode@glerro.pm.me"
+        "system-monitor@paradoxxx.zero.gmail.com"
+        "clipboard-indicator@tudmotu.com"
+        "emoji-copy@felipeftn"
+        "tailscale-gnome-qs@tailscale-qs.github.io"
+      ];
+    };
+  };
+
+  home.packages = with pkgs; [
+    # Scripts
+    (writeShellScriptBin "tea-init" ''
+      name="''${1:-$(basename "$PWD")}"
+      login="''${2:-git.extremist.software}"
+      user=$(tea logins list -o simple | awk -v l="$login" '$2 == "https://"l {print $4}')
+      if [ -z "$user" ]; then
+        echo "error: no tea login found for $login" >&2
+        exit 1
+      fi
+      tea repo create --name "$name" --login "$login"
+      git remote add origin "ssh://forgejo@''${login}/''${user}/''${name}.git"
+    '')
+    (writeShellScriptBin "ow" ''
+      sudo -v
+      sudo tailscale serve --bg 4096
+      exec opencode web --hostname 127.0.0.1 --port 4096
+    '')
+
+    # CLI
+    bat
+    bun
+    claude-code
+    ffmpeg-full
+    wrappedOpencode
+    skills
+    zellijNewTabZoxide
+    zellijSyncTabName
+    fd
+    btop
+    fastfetch
+    gh
+    hyfetch
+    jq
+    mkp224o
+    nixfmt
+    difftastic
+    ripgrep
+    tea
+    trash-cli
+    tree
+    unzip
+
+    # LSP Servers
+    rust-analyzer
+    typescript-language-server
+    nil
+
+    # Desktop
+    element-desktop
+    file-roller
+    font-manager
+    gimp3
+    google-chrome
+    handbrake
+    inkscape
+    kdePackages.kdenlive
+    libreoffice
+    logseq
+    obs-studio
+    pavucontrol
+    prismlauncher
+    qpwgraph
+    qbittorrent-enhanced
+    signal-desktop
+    slack
+    tor-browser
+    vesktop
+    vlc
+    zulip
+    linphone
+    lmstudio
+
+    # Fonts
+    nerd-fonts.commit-mono
+
+    # GNOME Extensions
+    gnomeExtensions.clipboard-indicator
+    gnomeExtensions.emoji-copy
+    gnomeExtensions.hide-top-bar
+    gnomeExtensions.system-monitor-next
+    gnomeExtensions.wifi-qrcode
+  ];
+
+  home.sessionVariables = {
+    BROWSER = "zen";
+    TERMINAL = "kitty";
+  };
+
+  programs.git = {
+    enable = true;
+    settings = {
+      user.name = name;
+      user.email = email;
+      core.sshCommand = "ssh -o ServerAliveInterval=60 -o ServerAliveCountMax=3";
+      core.compression = 6;
+      pack.windowMemory = "256m";
+      pack.packSizeLimit = "2g";
+      pack.threads = 1;
+      gpg.ssh.allowedSignersFile = "~/.config/git/allowed_signers";
+    };
+    signing = {
+      key = sshSigningKey;
+      signByDefault = true;
+      format = "ssh";
+    };
+  };
+
+  home.file.".gitconfig".text = ''
+    # Compatibility shim for tools that only read ~/.gitconfig.
+    [include]
+      path = ~/.config/git/config
+  '';
+
+  home.file.".config/git/allowed_signers".text = "${email} ${sshPublicKey}\n";
+
+  programs.helix = {
+    enable = true;
+    defaultEditor = true;
+    settings = {
+      theme = "dark_high_contrast";
+      editor = {
+        line-number = "relative";
+        lsp.display-messages = true;
+        lsp.display-inlay-hints = true;
+        end-of-line-diagnostics = "hint";
+        inline-diagnostics = {
+          cursor-line = "hint";
+          other-lines = "hint";
+        };
+      };
+    };
+  };
+
+  programs.starship = {
+    enable = true;
+    enableBashIntegration = true;
+    settings = {
+      format = "$directory$git_status$nix_shell$cmd_duration$line_break$character";
+      directory.truncation_length = 3;
+      git_status.style = "red";
+      git_branch.disabled = true;
+      nix_shell.format = "[$symbol]($style) ";
+      cmd_duration.min_time = 500;
+      character.success_symbol = "[❯](bold green)";
+      character.error_symbol = "[❯](bold red)";
+    };
+  };
+
+  programs.zellij = {
+    enable = true;
+    enableBashIntegration = false;
+
+    layouts.tabs-and-mode = ''
+      layout {
+        pane
+        pane size=1 borderless=true {
+          plugin location="status-bar"
+        }
+        pane size=1 borderless=true {
+          plugin location="tab-bar"
+        }
+      }
+    '';
+
+    layouts.zoxide-picker = ''
+      layout {
+        pane command="${zellijNewTabZoxide}/bin/zellij-new-tab-zoxide" close_on_exit=true
+        pane size=1 borderless=true {
+          plugin location="compact-bar"
+        }
+      }
+    '';
+
+    settings = {
+      # Default shell (using bash as configured in your system)
+      default_shell = "bash";
+      default_layout = "zoxide-picker";
+      pane_frames = false;
+      simplified_ui = true;
+
+      # Mouse and interaction settings - enable for proper pane handling
+      mouse_mode = true;
+      copy_on_select = true;
+
+      show_startup_tips = false;
+      show_release_notes = false;
+
+      attach_to_session = true;
+      session_name = "main";
+      on_force_close = "detach";
+      session_serialization = true;
+      serialize_pane_viewport = true;
+
+      ui = {
+        pane_frames = {
+          hide_session_name = true;
+        };
+      };
+    };
+
+    extraConfig = ''
+      keybinds {
+        tab {
+          bind "n" { NewTab { layout "zoxide-picker"; }; SwitchToMode "Normal"; }
+          bind "N" { NewTab; SwitchToMode "Normal"; }
+        }
+      }
+    '';
+  };
+
+  programs.eza = {
+    enable = true;
+    icons = "always";
+    enableBashIntegration = true;
+    git = true;
+    extraOptions = [
+      "--group-directories-first"
+      "--all"
+    ];
+  };
+
+  programs.fzf = {
+    enable = true;
+    enableBashIntegration = true;
+  };
+
+  programs.zoxide = {
+    enable = true;
+    enableBashIntegration = true;
+  };
+
+  programs.direnv = {
+    enable = true;
+    enableBashIntegration = true;
+    nix-direnv.enable = true;
+  };
+
+  programs.bash = {
+    enable = true;
+    enableCompletion = true;
+    historyControl = [
+      "ignoredups"
+      "erasedups"
+    ];
+    historySize = 50000;
+    historyFileSize = 100000;
+    shellOptions = [
+      "histappend"
+      "checkwinsize"
+      "globstar"
+    ];
+    shellAliases = {
+      "dr" = "direnv reload";
+      "da" = "direnv allow";
+      "nfu" = "nix flake update";
+      "o" =
+        "OPENCODE_PERMISSION='{\"*\":\"allow\",\"external_directory\":\"allow\",\"doom_loop\":\"allow\"}' opencode";
+      "os" = "opencode";
+      ".." = "z ..";
+      j = "jj";
+      jgf = "jj git fetch";
+      jgp = "jj git push";
+      jgc = "jj git clone --colocate";
+      jbs = "jj bookmark set";
+      jd = "jj describe";
+      js = "jj show";
+      jss = "jj show -s";
+      jab = "jj abandon";
+      jsp = "jj split";
+      je = "jj edit --ignore-immutable";
+      jall = "jj log -r 'all()'";
+      jn = "jj new";
+      jdiff = "jj diff";
+      jsq = "jj squash";
+      h = "hx";
+      t = "trash";
+      vanity = "mkp224o-amd64-64-24k -d noisebridgevanitytor noisebridge{2..7}";
+    };
+    initExtra = ''
+      # Automatically list directory contents when changing directories
+      auto_l_on_cd() {
+        if [ "$__LAST_PWD" != "$PWD" ]; then
+          l
+          __LAST_PWD="$PWD"
+        fi
+      }
+
+      export PROMPT_COMMAND="auto_l_on_cd; $PROMPT_COMMAND"
+      __LAST_PWD="$PWD"
+    '';
+  };
+
+  programs.kitty = {
+    enable = true;
+    settings = {
+      hide_window_decorations = "yes";
+      draw_minimal_borders = "yes";
+      font_family = "CommitMono Nerd Font";
+      font_size = "12";
+      confirm_os_window_close = "0";
+      enable_audio_bell = "no";
+    };
+    themeFile = "GitHub_Dark_High_Contrast";
+  };
+
+  programs.jujutsu = {
+    enable = true;
+    settings = {
+      remotes.origin.auto-track-bookmarks = "glob:*";
+      user = {
+        inherit email name;
+      };
+
+      signing = {
+        behavior = "own";
+        backend = "ssh";
+        key = sshSigningKey;
+      };
+
+      git = {
+        sign-on-push = true;
+      };
+      ui = {
+        default-command = "log";
+        editor = "hx";
+        pager = "bat --style=plain";
+      };
+      diff.tool = [
+        "difft"
+        "--color=always"
+        "$left"
+        "$right"
+      ];
+    };
+  };
+
+  # Configure Zen Browser with about:config settings
+  programs.zen-browser = {
+    enable = true;
+    policies = {
+      DisableTelemetry = true;
+      DisableFirefoxStudies = true;
+      DisablePocket = true;
+      DontCheckDefaultBrowser = true;
+      DisableAppUpdate = true;
+      DisableMasterPasswordCreation = true;
+      DisablePasswordReveal = true;
+      DisableProfileImport = true;
+      ExtensionUpdate = false;
+      OfferToSaveLogins = false;
+      DisableFirefoxAccounts = true;
+      DisableFormHistory = true;
+      DisableSafeMode = true;
+      DisableSetDesktopBackground = true;
+      EnableTrackingProtection = {
+        Value = true;
+        Locked = true;
+        Cryptomining = true;
+        Fingerprinting = true;
+      };
+      HardwareAcceleration = true;
+      NoDefaultBookmarks = true;
+      PasswordManagerEnabled = false;
+      Preferences = {
+        "zen.theme.border-radius" = 0;
+        "zen.theme.content-element-separation" = 0;
+      };
+    };
+    profiles.default = {
+      isDefault = true;
+      settings = {
+        "identity.fxaccounts.enabled" = false;
+      };
+      extensions.packages = with pkgs.nur.repos.rycee.firefox-addons; [
+        ublock-origin
+        onepassword-password-manager
+        sponsorblock
+        darkreader
+        vimium
+        return-youtube-dislikes
+        react-devtools
+        firefox-color
+        pay-by-privacy
+        translate-web-pages
+        user-agent-string-switcher
+        copy-selected-tabs-to-clipboard
+        dearrow
+        violentmonkey
+        tst-indent-line
+      ];
+      search = {
+        default = "SearXNG";
+        privateDefault = "SearXNG";
+        force = true;
+        engines = {
+          "SearXNG" = {
+            urls = [ { template = "https://search.extremist.software/search?q={searchTerms}"; } ];
+            definedAliases = [ "@s" ];
+          };
+        };
+      };
+    };
+  };
+
+  # Override the Kitty desktop entry to always launch in fullscreen
+  xdg.desktopEntries.kitty = {
+    name = "Kitty";
+    genericName = "Terminal Emulator";
+    exec = "${pkgs.kitty}/bin/kitty --start-as=fullscreen ${zellijPersistentSession}/bin/zellij-persistent-session";
+    icon = "kitty";
+    type = "Application";
+    categories = [
+      "System"
+      "TerminalEmulator"
+    ];
+    comment = "Fast, featureful, GPU based terminal emulator";
+  };
+
+  # Extract archives on double-click
+  xdg.desktopEntries.extract-here = {
+    name = "Extract Here";
+    exec = "file-roller --extract-here %U";
+    icon = "file-roller";
+    type = "Application";
+    categories = [ "Utility" ];
+    mimeType = [
+      "application/zip"
+      "application/x-tar"
+      "application/x-compressed-tar"
+      "application/x-bzip-compressed-tar"
+      "application/x-xz-compressed-tar"
+      "application/x-zstd-compressed-tar"
+      "application/gzip"
+      "application/x-7z-compressed"
+      "application/x-rar"
+      "application/x-rar-compressed"
+    ];
+    noDisplay = true;
+  };
+
+  xdg.desktopEntries.betterbird = {
+    name = "Betterbird";
+    genericName = "Mail Client";
+    exec = "${pkgs.flatpak}/bin/flatpak run eu.betterbird.Betterbird %u";
+    icon = "eu.betterbird.Betterbird";
+    type = "Application";
+    categories = [
+      "Network"
+      "Email"
+    ];
+    mimeType = [
+      "x-scheme-handler/mailto"
+      "x-scheme-handler/webcal"
+      "text/calendar"
+    ];
+    comment = "Fine-tuned Thunderbird mail client";
+  };
+
+  # Autostart applications using proper desktop files
+  xdg.autostart = {
+    enable = true;
+    entries = [
+      "${zenStartup}/share/applications/zen-startup.desktop"
+      "${kittyZellijStartup}/share/applications/kitty-zellij-startup.desktop"
+      "${signalStartup}/share/applications/signal-startup.desktop"
+      "${betterbirdStartup}/share/applications/betterbird-startup.desktop"
+      "${vesktopStartup}/share/applications/vesktop-startup.desktop"
+      "${zulipStartup}/share/applications/zulip-startup.desktop"
+    ];
+  };
+
+  home.file.".local/share/gnome-shell/extensions/tailscale-gnome-qs@tailscale-qs.github.io" = {
+    source = "${tailscaleQsExtension}/share/gnome-shell/extensions/tailscale-gnome-qs@tailscale-qs.github.io";
+    recursive = true;
+  };
+
+  systemd.user.services.nasa-apod-wallpaper = {
+    Unit = {
+      Description = "Fetch NASA APOD wallpaper";
+      After = [ "graphical-session.target" ];
+      PartOf = [ "graphical-session.target" ];
+    };
+    Service = {
+      Type = "oneshot";
+      ExecStart = "${nasaApodWallpaper}/bin/nasa-apod-wallpaper";
+    };
+  };
+
+  systemd.user.timers.nasa-apod-wallpaper = {
+    Unit.Description = "Refresh NASA APOD wallpaper daily";
+    Timer = {
+      OnStartupSec = "0";
+      OnUnitActiveSec = "1d";
+      Unit = "nasa-apod-wallpaper.service";
+    };
+    Install.WantedBy = [ "timers.target" ];
+  };
+
+  # Set Zen Browser as default
+  xdg.mimeApps = {
+    enable = true;
+    defaultApplications = {
+      "text/html" = "zen-beta.desktop";
+      "x-scheme-handler/http" = "zen-beta.desktop";
+      "x-scheme-handler/https" = "zen-beta.desktop";
+      "x-scheme-handler/about" = "zen-beta.desktop";
+      "x-scheme-handler/unknown" = "zen-beta.desktop";
+      "x-scheme-handler/mailto" = "betterbird.desktop";
+      "inode/directory" = "org.gnome.Nautilus.desktop";
+      "application/zip" = "org.gnome.FileRoller.desktop";
+      "application/x-tar" = "org.gnome.FileRoller.desktop";
+      "application/x-compressed-tar" = "org.gnome.FileRoller.desktop";
+      "application/x-bzip-compressed-tar" = "org.gnome.FileRoller.desktop";
+      "application/x-xz-compressed-tar" = "org.gnome.FileRoller.desktop";
+      "application/x-zstd-compressed-tar" = "org.gnome.FileRoller.desktop";
+      "application/gzip" = "org.gnome.FileRoller.desktop";
+      "application/x-7z-compressed" = "org.gnome.FileRoller.desktop";
+      "application/x-rar" = "org.gnome.FileRoller.desktop";
+      "application/x-rar-compressed" = "org.gnome.FileRoller.desktop";
+    };
+  };
+
+  home.file.".config/opencode/opencode.json".text = builtins.toJSON {
+    "$schema" = "https://opencode.ai/config.json";
+    autoupdate = false;
+    plugin = [ "opencode-with-claude" ];
+    mcp.linear = {
+      type = "remote";
+      url = "https://mcp.linear.app/mcp";
+      enabled = true;
+    };
+    model = "openai/gpt-5.4-fast";
+    small_model = "openai/gpt-5.4-mini-fast";
+    provider.openai.models."gpt-5.4-fast".options = {
+      reasoningEffort = "xhigh";
+    };
+    share = "disabled";
+  };
+
+  home.file.".config/opencode/AGENTS.md".text = ''
+    # NixOS Rules
+
+    - This machine is NixOS. Prefer the Nix way for installing and running tools.
+    - Do not suggest `apt`, `dnf`, `pacman`, `brew`, `npm -g`, `pip install`, `cargo install`, `curl | sh`, or manual installers unless explicitly asked.
+    - If a repo has `flake.nix`, treat it as the source of truth for project tooling.
+    - If a needed tool belongs to the project, add it to `flake.nix` or the dev shell instead of installing it another way.
+    - If a repo has `flake.nix`, ensure `.envrc` contains `use flake` unless the repo intentionally uses a different setup.
+    - If there is no `flake.nix` and the tool is only needed temporarily, prefer `nix shell nixpkgs#<pkg> -c <command>`.
+    - For persistent tools, prefer declarative Nix configuration.
+    - Prefer `direnv` or `nix develop` before deciding a tool is missing.
+    - Never run `nixos-rebuild`, `nh os switch`, `nhs`, or other system switch commands unless explicitly asked.
+  '';
+
+  home.file.".config/opencode/tui.json".text = builtins.toJSON {
+    "$schema" = "https://opencode.ai/tui.json";
+    keybinds = {
+      leader = "ctrl+x";
+      command_list = "<leader>p";
+      variant_cycle = "<leader>t";
+    };
+  };
+
+  xdg.userDirs = {
+    enable = true;
+    setSessionVariables = true;
+  };
+
+  gtk = {
+    enable = true;
+    gtk4.theme = config.gtk.theme;
+    gtk3.extraConfig.gtk-application-prefer-dark-theme = 1;
+  };
+
+}
diff --git a/hosts/laptop/hardware-configuration.nix b/hosts/laptop/hardware-configuration.nix
deleted file mode 100644
index 0b89762..0000000
--- a/hosts/laptop/hardware-configuration.nix
+++ /dev/null
@@ -1,40 +0,0 @@
-# Do not modify this file!  It was generated by ‘nixos-generate-config’
-# and may be overwritten by future invocations.  Please make changes
-# to /etc/nixos/configuration.nix instead.
-{ config, lib, pkgs, modulesPath, ... }:
-
-{
-  imports =
-    [ (modulesPath + "/installer/scan/not-detected.nix")
-    ];
-
-  boot.initrd.availableKernelModules = [ "xhci_pci" "nvme" "usb_storage" "sd_mod" ];
-  boot.initrd.kernelModules = [ ];
-  boot.kernelModules = [ "kvm-intel" ];
-  boot.extraModulePackages = [ ];
-
-  fileSystems."/" =
-    { device = "/dev/disk/by-uuid/ad656dd1-ef88-4930-b8dd-f61765bdc067";
-      fsType = "ext4";
-    };
-
-  fileSystems."/boot" =
-    { device = "/dev/disk/by-uuid/16AA-5446";
-      fsType = "vfat";
-    };
-
-  swapDevices =
-    [ { device = "/dev/disk/by-uuid/cc53c40a-4c06-4fcf-844e-8e55147fc2ae"; }
-    ];
-
-  # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
-  # (the default) this is the recommended approach. When using systemd-networkd it's
-  # still possible to use this option, but it's recommended to use it in conjunction
-  # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
-  networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.enp0s31f6.useDHCP = lib.mkDefault true;
-  # networking.interfaces.wlp2s0.useDHCP = lib.mkDefault true;
-
-  nixpkgs.hostPlatform = lib.mkDefault "x86_64-linux";
-  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
-}
diff --git a/hosts/laptop/user.nix b/hosts/laptop/user.nix
deleted file mode 100644
index 82c2e9c..0000000
--- a/hosts/laptop/user.nix
+++ /dev/null
@@ -1,24 +0,0 @@
-{ config, lib, inputs, ...}:
-
-{
-    imports = [ ../../modules/default.nix ];
-    config.modules = {
-        # gui
-        firefox.enable = true;
-        kitty.enable = true;
-        eww.enable = true;
-        dunst.enable = true;
-        hyprland.enable = true;
-        wofi.enable = true;
-
-        # cli
-        nvim.enable = true;
-        git.enable = true;
-        nushell.enable = true;
-        direnv.enable = true;
-
-        # system
-        xdg.enable = true;
-        packages.enable = true;
-    };
-}
diff --git a/lib/default.nix b/lib/default.nix
deleted file mode 100644
index c9d221d..0000000
--- a/lib/default.nix
+++ /dev/null
@@ -1,3 +0,0 @@
-inputs: {
-  mkSystem = import ./mkSystem.nix inputs;
-}
diff --git a/lib/mkSystem.nix b/lib/mkSystem.nix
deleted file mode 100644
index 5ae4789..0000000
--- a/lib/mkSystem.nix
+++ /dev/null
@@ -1,11 +0,0 @@
-{ self, ... } @ inputs: name: system: inputs.nixpkgs.lib.nixosSystem (
-  {
-    inherit system;
-    specialArgs = { inherit inputs self; };
-    modules = [
-      "${self}/hosts/${name}/system.nix"
-      "${self}/hosts/${name}/user.nix"
-      inputs.home-manager.nixosModule
-    ];
-  }
-)
diff --git a/modules/default.nix b/modules/default.nix
deleted file mode 100644
index 77a2de4..0000000
--- a/modules/default.nix
+++ /dev/null
@@ -1,24 +0,0 @@
-{ inputs, pkgs, config, ... }:
-
-{
-    home.stateVersion = "21.03";
-    imports = [
-        # gui
-        ./firefox
-        ./eww
-        ./dunst
-        ./kitty
-        ./hyprland
-        ./wofi
-
-        # cli
-        ./nvim
-        ./nushell
-        ./git
-        ./direnv
-
-        # system
-        ./xdg
-	    ./packages
-    ];
-}
diff --git a/modules/direnv/default.nix b/modules/direnv/default.nix
deleted file mode 100644
index 9db2079..0000000
--- a/modules/direnv/default.nix
+++ /dev/null
@@ -1,14 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.direnv;
-
-in {
-    options.modules.direnv= { enable = mkEnableOption "direnv"; };
-    config = mkIf cfg.enable {
-        programs.direnv = {
-            enable = true;
-            nix-direnv.enable = true;
-        };
-    };
-}
diff --git a/modules/dunst/default.nix b/modules/dunst/default.nix
deleted file mode 100644
index 1dc85ac..0000000
--- a/modules/dunst/default.nix
+++ /dev/null
@@ -1,42 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.dunst;
-
-in {
-    options.modules.dunst = { enable = mkEnableOption "dunst"; };
-    config = mkIf cfg.enable {
-	home.packages = with pkgs; [
-	    dunst
-	];
-
-        services.dunst = {
-            enable = true;
-            settings = {
-                global = {
-                    origin = "top-left";
-                    offset = "60x12";
-                    separator_height = 2;
-                    padding = 12;
-                    horizontal_padding = 12;
-                    text_icon_padding = 12;
-                    frame_width = 4;
-                    separator_color = "frame";
-                    idle_threshold = 120;
-                    font = "JetBrainsMono Nerdfont 12";
-                    line_height = 0;
-                    format = "<b>%s</b>\n%b";
-                    alignment = "center";
-                    icon_position = "off";
-                    startup_notification = "false";
-                    corner_radius = 12;
-
-                    frame_color = "#44465c";
-                    background = "#303241";
-                    foreground = "#d9e0ee";
-                    timeout = 2;
-                };
-            };
-        };
-    };
-}
diff --git a/modules/eww/default.nix b/modules/eww/default.nix
deleted file mode 100644
index 2eae452..0000000
--- a/modules/eww/default.nix
+++ /dev/null
@@ -1,50 +0,0 @@
-{ inputs, lib, config, pkgs, ... }:
-with lib;
-let
-    cfg = config.modules.eww;
-in {
-    options.modules.eww = { enable = mkEnableOption "eww"; };
-
-    config = mkIf cfg.enable {
-        # theres no programs.eww.enable here because eww looks for files in .config
-        # thats why we have all the home.files
-
-        # eww package
-        home.packages = with pkgs; [
-            eww
-            pamixer
-            brightnessctl
-            (nerdfonts.override { fonts = [ "JetBrainsMono" ]; })
-        ];
-
-        # configuration
-        home.file.".config/eww/eww.scss".source = ./eww.scss;
-        home.file.".config/eww/eww.yuck".source = ./eww.yuck;
-
-        # scripts
-        home.file.".config/eww/scripts/battery.sh" = {
-            source = ./scripts/battery.sh;
-            executable = true;
-        };
-
-        home.file.".config/eww/scripts/wifi.sh" = {
-            source = ./scripts/wifi.sh;
-            executable = true;
-        };
-
-        home.file.".config/eww/scripts/brightness.sh" = {
-            source = ./scripts/brightness.sh;
-            executable = true;
-        };
-
-        home.file.".config/eww/scripts/workspaces.sh" = {
-            source = ./scripts/workspaces.sh;
-            executable = true;
-        };
-
-        home.file.".config/eww/scripts/workspaces.lua" = {
-            source = ./scripts/workspaces.lua;
-            executable = true;
-        };
-    };
-}
diff --git a/modules/eww/eww.scss b/modules/eww/eww.scss
deleted file mode 100644
index 88f0320..0000000
--- a/modules/eww/eww.scss
+++ /dev/null
@@ -1,291 +0,0 @@
-$base: #44465c;
-$blue: #3fc6de;
-$surface0: #44465c;
-$surface1: #44465c;
-$text: #d9e0ee;
-$overlay0: #6e738d;
-$red: #ec6a88;
-$peach: #efb993;
-$yellow: #efb993;
-$mauve: #b072d1;
-$green: #3fdaa4;
-$mantle: #292a37;
-$crust: #2e303e;
-$light-gray: #9699b7;
-
-* {
-    all: unset; //Unsets everything so you can style everything from scratch
-    font-family: "JetBrainsMono"
-}
-
-.icon {
-    font-family: monospace;
-    font-size: 1.4rem;
-}
-
-
-button {
-    transition: background-color 200ms, color 200ms;
-}
-
-.active {
-    color: $green;
-    font-size: 1.4rem;
-}
-
-.inactive {
-    color: $base;
-    font-size: 1.4rem;
-}
-
-.inactive:hover {
-    color: $light-gray;
-}
-
-.bar {
-    background-color: $mantle;
-    border-left: 4px dotted $red;
-}
-
-.dashboard {
-    background-color: $mantle;
-    padding: 1rem;
-    margin-bottom: 1rem;
-}
-
-.cal-box {
-    padding: 1rem 1rem .2rem;
-}
-
-.cal {
-    padding: 0;
-    border-radius: 8px;
-}
-
-.calendar_box {
-    padding: 1rem;
-    calendar:selected {
-        color: $blue;
-    }
-
-    calendar.header {
-        color: $blue;
-        font-weight: bold;
-    }
-
-    calendar.button {
-        color: $blue;
-    }
-
-    calendar.highlight {
-        color: $green;
-        font-weight: bold;
-    }
-
-    calendar:indeterminate {
-        color: rgba(205, 219, 249, 0.3);
-    }
-}
-
-.sysinfo_box {
-    padding: 1rem;
-    .iconmem {
-        font-size: 3rem;
-        color: $yellow;
-    }
-    .iconcpu {
-        font-size: 3rem;
-        color: $blue;
-    }
-    .icondisk {
-        font-size: 3rem;
-        color: $green;
-    }
-    .cpubar, .membar, .diskbar {
-        background-color: $crust;
-    }
-}
-.slider_box {
-    padding: 0 1rem;
-    scale {
-        background-color: $crust;
-        border-radius: 100px;
-        margin: 0.5rem 0;
-    }
-
-    scale trough {
-        border-radius: 100px;
-    }
-
-    scale highlight {
-        padding: 8px;
-        margin: 8px;
-        border-radius: 100px;
-    }
-    
-    .brightness_slider highlight {
-        background-color: $yellow;
-    }
-
-    .volume_slider highlight {
-        background-color: $blue;
-    }
-
-    .micvolume_slider highlight {
-        background-color: $green;
-    }
-    
-    .slider_icon {
-        font-size: 2rem;
-        padding-right: 0.75rem;
-    }
-}
-
-.notification_box {
-}
-
-.wifi {
-  font-size: 2rem;
-  color: $blue;
-}
-
-.clock {
-  font-weight: bold;
-  background-color: $base;
-  color: $text;
-  border-radius: 10px;
-  padding: 0.2rem;
-  margin: 0.5rem;
-}
-
-.cpubar {
-  color: $blue;
-  background-color: $surface1;
-  margin: 4px 0;
-}
-
-.diskbar {
-  color: $green;
-  background-color: $surface1;
-  margin: 4px 0;
-}
-
-.membar {
-    color: $yellow;
-    background-color: $surface1;
-  margin: 4px 0;
-}
-
-.iconmem, .iconcpu, .icondisk {
-    color: $base;
-    font-size: 2.5rem;
-}
-
-.date {
-  font-size: 1.5rem;
-}
-
-.reg-btn { 
-    font-size: 2rem;
-    margin: 2px 8px;
-    border-radius: 10px;
-}
-
-.dashbutton {
-    color: $mauve;
-}
-
-.dashbutton:hover {
-    background-color: $base;
-}
-
-.dashbutton:active {
-    background-color: $mauve;
-    color: $mantle;
-}
-
-.powerbutton { 
-    color: $red; 
-}
-
-.powerbutton:hover {
-    background-color: $base;
-}
-
-.powerbutton:active {
-    background-color: $red;
-    color: $mantle;
-}
-
-.launchbutton { 
-    background-color: $blue; 
-    color: $mantle;
-    margin-top: 6px;
-}
-
-.launchbutton:hover {
-    background-color: $mauve;
-}
-
-.launchbutton:active {
-    color: $mauve;
-    background-color: $mantle;
-}
-
-.battery {
-    font-size: 1.5rem;
-    color: $blue;
-}
-
-// Credits AlphaTechnolog
-.powermenu-box {
-    padding: 0 2px;
-    margin: 7px 7px 7px 0px;
-    background: inherit;
-    .dispatcher {
-        border-radius: 15px;
-        background: $base;
-        color: $red;
-        font-size: 14px;
-        padding: 0 14px 0 10px;
-        &:hover { background-color: $surface0; }
-        &:active { background-color: $surface1; }
-    }
-}
-
-// powermenu
-.powermenu-container {
-  background: $crust;
-  color: $text;
-  padding: 10px;
-  font-size: 55px;
-
-  transition: all 200ms cubic-bezier(.1,-0.00,.0,1.49);
-
-  .btn { margin: 1rem;}
-  // shutdown
-  .shutdown-btn-box .btn {
-    color: $red;
-    border-radius: 15px;
-    background-color: $mantle;
-    &:hover { background-color: $base; }
-    &:active { background-color: $surface1; }
-  }
-  // reboot
-  .reboot-btn-box .btn {
-    color: $mauve;
-    border-radius: 15px;
-    background-color: $mantle;
-    &:hover { background-color: $base; }
-    &:active { background-color: $surface1; }
-  }
-  // exit
-  .exit-btn-box .btn {
-    color: $yellow;
-    border-radius: 15px;
-    background-color: $mantle;
-    &:hover { background-color: $base; }
-    &:active { background-color: $surface1; }
-  }
-}
-
diff --git a/modules/eww/eww.yuck b/modules/eww/eww.yuck
deleted file mode 100644
index ec30798..0000000
--- a/modules/eww/eww.yuck
+++ /dev/null
@@ -1,295 +0,0 @@
-(defwidget bar []
-  (centerbox :orientation "v" :hexpand false
-    (box :valign "start" :hexpand false :vexpand true :orientation "v" :space-evenly false
-      (launch)
-      (dashbutton)
-      (powerbutton)
-    )
-
-    (workspaces :halign "center" :vexpand true :hexpand false :orientation "v")
-
-    (box :valign "end" :hexpand false :vexpand true :orientation "v" :space-evenly false
-      (battery)
-      (wifi)
-      (mem :thickness 4 :icon "")
-      (cpu :thickness 4 :icon "")
-      (disk :thickness 4 :icon "")
-      (time)
-    )
-  )
-)
-
-(defpoll brightness :interval "999h" :initial 0 `brightnessctl -m | awk -F, '{print substr($4, 0, length($4)-1)}'`)
-(defpoll volume :interval "999h" :initial 0 `pamixer --get-volume`)
-(defpoll micvolume :interval "999h" :initial 0 `pamixer --get-volume --source 1`)
-(defwidget dashboard []
-  (box :orientation "v" 
-    (box :class "info_box" :orientation "v" :space-evenly false
-      (box :class "calendar_box"
-        (calendar :width 200 :class "cal")
-      )
-
-      (box :class "slider_box" :orientation "v" :vexpand false :hexpand false
-        (box :space-evenly false
-            (label :class "slider_icon" :text "")
-            (scale :min 1 :max 101 :width 315 :class "brightness_slider" :value brightness :onchange "brightnessctl set {}%" :height 10)
-        )
-        (box :space-evenly false
-          (label :class "slider_icon" :text "墳")
-          (scale :min 1 :max 101 :width 315 :class "volume_slider" :value volume :onchange "pamixer --set-volume $(echo {} | sed 's/[.].*$//')")
-        )
-        (box :space-evenly false
-          (label :class "slider_icon" :text "")
-          (scale :min 1 :max 101 :width 315 :class "micvolume_slider" :value micvolume :onchange "pamixer --set-volume $(echo {} | sed 's/[.].*$//') --source 1")
-        )
-      )
-      (box :class "sysinfo_box" :orientation "h" :vexpand true :spacing 15 
-        (mem :thickness 12 :icon "")
-        (cpu :thickness 12 :icon "")
-        (disk :thickness 12 :icon "")
-      )
-    )
-    (box :class "notification_box"
-    )     
-  )
-)
-
-
-
-
-;; Variables
-(defvar time false)
-(defvar cal false)
-
-;; ━━━ WIDGETS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-;; ━━━ MEMORY ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-(defwidget dashbutton[]
-  (button :class "reg-btn dashbutton" :onclick "eww open dashboard --toggle" "舘")
-)
-
-
-
-;; ━━━ MEMORY ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-(defwidget mem [icon thickness]
-  (box :vexpand "false" :hexpand "false"
-    (circular-progress  :value {EWW_RAM.used_mem_perc}
-                        :class "membar"
-                        :thickness {thickness}
-                        :start-at 75
-
-        (label :class "iconmem" :text {icon})
-    )
-  )
-)
-
-;; ━━━ CPU ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-(defwidget cpu [icon thickness]
-  (box :vexpand "false" :hexpand "false"
-    (circular-progress  :value {EWW_CPU.avg}
-                        :class "cpubar"
-                        :thickness {thickness}
-                        :start-at 75
-
-      (label :class "iconcpu" :text {icon})
-    )
-  )
-)
-
-;; ━━━ DISK ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-(defwidget disk [icon thickness]
-  (box :vexpand "false" :hexpand "false"
-    (circular-progress  :value {EWW_DISK["/"].used_perc}
-                        :class "diskbar"
-                        :thickness {thickness}
-                        :start-at 75
-      (label :class "icondisk" :text {icon})
-
-    )
-  )
-)
-
-
-;; ━━━ WIFI ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-(defvar wifi "{}")
-(defpoll wifi :interval "30s" "./scripts/wifi.sh")
-
-(defwidget wifi []
- (box :vexpand false :hexpand false :orientation "v"
-   (label :text {wifi.icon}
-          :limit-width 10
-          :tooltip {wifi.status}
-          :class "wifi"
-    )
-  )
-)
-
-;; ━━━ BATTERY ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-(defvar battery "{}")
-(defpoll battery :interval "60s" "./scripts/battery.sh")
-
-(defwidget battery []
-   (label :text {battery.icon}
-          :limit-width 10
-          :tooltip "${battery.status}: ${battery.percent}"
-          :class "battery"
-  )
-)
-
-
-;; ━━━ VOLUME ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-(defvar volume-level 50)
-(defvar volume-muted false)
-
-(defwindow volume
-  :monitor 0
-  :geometry (geometry :y "100px" :x "0px" :width "250px" :height "200px" :anchor "center bottom")
-  :windowtype "dock"
-  :wm-ignore true
-  :stacking "fg"
-
-  (box :class "volume-window"
-       :orientation "v"
-       :space-evenly "false"
-    (box :class "volume-widget"
-         :orientation "h"
-         :space-evenly false
-         :spacing 10
-      (label :text {volume-muted ? "" :
-                    volume-level == 0 ? "" :
-                    volume-level < 32 ? "" :
-                    volume-level < 65 ? "" :
-                    ""}
-
-             :class 'volume-icon ${volume-muted ? "volume-icon-muted" : ""}'
-      )
-      (scale :class 'volume-slider ${volume-muted ? "volume-slider-muted" : ""}'
-             :hexpand "true"
-             :min 0
-             :max 100
-             :height 8
-             :marks true
-             :value volume-level
-             :onchange "pamixer --set-volume {}"))))
-
-;; ━━━ TIME ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-(defpoll hour :interval "10s" "date +%H")
-(defpoll minute :interval "10s" "date +%M")
-(defpoll dateVar :interval "600s" "date '+%A %d.%m.%y'")
-
-(defwidget time []
-  (eventbox :cursor "hand"  :hexpand false :vexpand false
-                :tooltip "${dateVar}"
-    (box :orientation "v" :hexpand false :vexpand false :space-evenly false :class "clock"
-    (button		:class "date"
-                :onclick ""	"${hour}")
-
-    (button		:class "date"
-                :onclick ""	"${minute}")
-    )
-  )
-)
-
-
-
-
-(defvar bright-level 50)
-(defvar bright-muted false)
-(defwindow brightness
-  :monitor 0
-  :geometry (geometry :y "-60px" :x "60px" :width "300px" :height "150px" :anchor "bottom left")
-  :wm-ignore true
-  :stacking "fg"
-
-  (box :class "volume-window"
-       :orientation "v"
-       :space-evenly "false"
-    (box :class "volume-widget"
-         :orientation "h"
-         :space-evenly false
-         :spacing 10
-      (label :text ""
-             :class 'volume-icon'
-      )
-      (scale :class 'volume-slider'
-             :hexpand "true"
-             :min 0
-             :max 100
-             :height 8
-             :marks true
-             :value bright-level
-             :onchange "brightnessctl set {}%"))))
-(defwidget launch []
-  (button		:class "reg-btn launchbutton"
-                :hexpand true
-                :onclick "wofi --show run --xoffset=1670 --yoffset=12 --width=230px --height=984 --style=$HOME/.config/wofi.css --term=kittyclient --prompt=Run &" "")
-)
-
-(defwidget powerbutton []
-  (eventbox :cursor "hand"
-  (button		:class "reg-btn powerbutton"
-                :onclick "eww open powermenu --toggle &"	"")
-  )
-)
-                                                  (defwidget powermenucontent []
-                                                  (box :orientation "h"
-  :class "powermenu-container"
-  (box :class "shutdown-btn-box"
-       :orientation "h"
-    (button :class "btn"
-            :tooltip "Shutdown"
-            :onclick "eww close powermenu && shutdown now"
-      "⏻")
-    )
-  (box :class "reboot-btn-box"
-       :orientation "h"
-    (button :class "btn"
-            :tooltip "Reboot"
-            :onclick "eww close powermenu && reboot"
-      "")
-    )
-  (box :class "exit-btn-box"
-       :orientation "h"
-    (button :class "btn"
-            :tooltip "Suspend"
-            :onclick "systemctl suspend"
-      "")
-    )
-  )
-)
-
-(defwindow powermenu
-  :monitor 0
-  :geometry (geometry :x "0%"
-  :y "0%"
-  :width "30%"
-  :height "15%"
-  :anchor "center center")
-  :wm-ignore true
-  (powermenucontent))
-
-(deflisten workspaces_listen "./scripts/workspaces.sh")
-(defwidget workspaces []
-  (literal :content workspaces_listen))
-
-(defwindow dashboard
-  :monitor 0
-  :geometry (geometry 
-  :height "1080px" 
-  :width "350px"
-  :x "48px"
-  :y "0px"
-  :anchor "top left")
-  :stacking "fg"
-  :class "dashboard"
-  (dashboard))
-
-(defwindow bar
-  :monitor 0
-  :exclusive false 
-  :geometry (geometry :height "1080px" :x "-4px" :y "0px"
-  :width "52px"
-  :anchor "top left")
-  :stacking "fg"
-  (bar))
diff --git a/modules/eww/scripts/battery.sh b/modules/eww/scripts/battery.sh
deleted file mode 100755
index 46fe3f8..0000000
--- a/modules/eww/scripts/battery.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-
-bat=/sys/class/power_supply/BAT1/
-per="$(cat "$bat/capacity")"
-status="$(cat "$bat/status")"
-
-if [ "$per" -gt "90" ]; then
-	icon=""
-elif [ "$per" -gt "80" ]; then
-	icon=""
-elif [ "$per" -gt "70" ]; then
-	icon=""
-elif [ "$per" -gt "60" ]; then
-	icon=""
-elif [ "$per" -gt "50" ]; then
-	icon=""
-elif [ "$per" -gt "40" ]; then
-	icon=""
-elif [ "$per" -gt "30" ]; then
-	icon=""
-elif [ "$per" -gt "20" ]; then
-	icon=""
-elif [ "$per" -gt "10" ]; then
-	icon=""
-elif [ "$per" -gt "0" ]; then
-	icon=""
-else
-        icon=""
-fi
-
-
-
-
-if [ -s /sys/class/power_supply/BAT1/capacity ]; then
-    echo "{\"percent\": \"$per\", \"icon\": \"$icon\", \"charging\": \"$charging\", \"visible\": \"true\", \"status\": \"$status\"}"
-else
-    echo "{\"visible\": \"false\" }"
-fi
diff --git a/modules/eww/scripts/brightness.sh b/modules/eww/scripts/brightness.sh
deleted file mode 100755
index 47f9d4e..0000000
--- a/modules/eww/scripts/brightness.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-
-if eww windows | grep -q "\*brightness"; then
-    eww update bright-level="$(brightnessctl -m -d intel_backlight | awk -F, '{print substr($4, 0, length($4)-1)}' | tr -d '%')"
-else
-    eww close volume
-    eww open brightness
-
-    eww update bright-level="$(brightnessctl -m -d intel_backlight | awk -F, '{print substr($4, 0, length($4)-1)}' | tr -d '%')"
-    sleep 2
-    sleep 1
-    eww close brightness
-fi
diff --git a/modules/eww/scripts/volume.sh b/modules/eww/scripts/volume.sh
deleted file mode 100755
index 974530b..0000000
--- a/modules/eww/scripts/volume.sh
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-if eww windows | rg -q "\*volume"; then
-    eww update volume-level=$(pamixer --get-volume)
-    eww update volume-muted=$(pamixer --get-mute)
-    eww update volume-hidden=false
-else
-    eww close brightness
-    eww open volume
-
-    eww update volume-level=$(pamixer --get-volume)
-    eww update volume-muted=$(pamixer --get-mute)
-    eww update volume-hidden=false
-    sleep 2
-    eww update volume-hidden=true
-    sleep 1
-    eww close volume
-fi
diff --git a/modules/eww/scripts/wifi.sh b/modules/eww/scripts/wifi.sh
deleted file mode 100755
index 02cbf34..0000000
--- a/modules/eww/scripts/wifi.sh
+++ /dev/null
@@ -1,12 +0,0 @@
-#!/bin/sh
-
-if iwctl station wlan0 show | grep -q "connected"; then
-    icon=""
-    ssid=Amadeus
-    status="Connected to ${ssid}"
-else
-    icon="睊"
-    status="offline"
-fi
-
-echo "{\"icon\": \"${icon}\", \"status\": \"${status}\"}" 
diff --git a/modules/eww/scripts/workspaces.lua b/modules/eww/scripts/workspaces.lua
deleted file mode 100755
index cb0ec28..0000000
--- a/modules/eww/scripts/workspaces.lua
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/usr/bin/env lua
-
-function trim(s)
-  return (string.gsub(s, "^%s*(.-)%s*$", "%1"))
-end
-
-aw = io.popen("hyprctl monitors | grep active | sed 's/()/(1)/g' | sort | awk 'NR>1{print $1}' RS='(' FS=')'")
-active_workspace = aw:read("*a")
-aw:close()
-
-ew = io.popen("hyprctl workspaces | grep ID | sed 's/()/(1)/g' | sort | awk 'NR>1{print $1}' RS='(' FS=')'")
-existing_workspaces = ew:read("*a")
-ew:close()
-
-box = "(box :orientation \"v\" :spacing 1 :space-evenly \"true\" "
-
-for i = 1, #existing_workspaces do
-    local c = existing_workspaces:sub(i,i)
-    if tonumber(c) == tonumber(active_workspace) then
-        local btn = "(button :class \"active\" :onclick \"hyprctl dispatch workspace "..c.." \" \"\")"
-        box = box .. btn
-    elseif c ~= "\n" then
-        local btn = "(button :class \"inactive\" :onclick \"hyprctl dispatch workspace "..c.."\" \"\")"
-        box = box .. btn
-    end
-end
-
-box = box .. ")"
-
-print(box)
diff --git a/modules/eww/scripts/workspaces.sh b/modules/eww/scripts/workspaces.sh
deleted file mode 100755
index 9ff9739..0000000
--- a/modules/eww/scripts/workspaces.sh
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-workspaces() {
-./scripts/workspaces.lua
-}
-workspaces
-tail -f /tmp/hypr/$HYPRLAND_INSTANCE_SIGNATURE/hyprland.log | grep --line-buffered "Changed to workspace" | while read -r; do 
-workspaces
-done
-
diff --git a/modules/firefox/default.nix b/modules/firefox/default.nix
deleted file mode 100644
index 168ed2b..0000000
--- a/modules/firefox/default.nix
+++ /dev/null
@@ -1,98 +0,0 @@
-{ inputs, lib, config, pkgs, ... }:
-with lib;
-let
-    cfg = config.modules.eww;
-
-in {
-    options.modules.firefox = { enable = mkEnableOption "firefox"; };
-
-    config = mkIf cfg.enable {
-        programs.firefox = {
-          profiles = {
-            default = {
-            enable = true;
-
-            # Install extensions from NUR
-            extensions = with pkgs.nur.repos.rycee.firefox-addons; [
-                decentraleyes
-                ublock-origin
-                clearurls
-                sponsorblock
-                darkreader
-                h264ify
-                df-youtube
-            ];
-
-            # Privacy about:config settings
-            profiles.notus = {
-                settings = {
-                    "browser.send_pings" = false;
-                    "browser.urlbar.speculativeConnect.enabled" = false;
-                    "dom.event.clipboardevents.enabled" = true;
-                    "media.navigator.enabled" = false;
-                    "network.cookie.cookieBehavior" = 1;
-                    "network.http.referer.XOriginPolicy" = 2;
-                    "network.http.referer.XOriginTrimmingPolicy" = 2;
-                    "beacon.enabled" = false;
-                    "browser.safebrowsing.downloads.remote.enabled" = false;
-                    "network.IDN_show_punycode" = true;
-                    "extensions.activeThemeID" = "firefox-compact-dark@mozilla.org";
-                    "app.shield.optoutstudies.enabled" = false;
-                    "dom.security.https_only_mode_ever_enabled" = true;
-                    "toolkit.legacyUserProfileCustomizations.stylesheets" = true;
-                    "browser.toolbars.bookmarks.visibility" = "never";
-                    "geo.enabled" = false;
-
-                    # Disable telemetry
-                    "browser.newtabpage.activity-stream.feeds.telemetry" = false;
-                    "browser.ping-centre.telemetry" = false;
-                    "browser.tabs.crashReporting.sendReport" = false;
-                    "devtools.onboarding.telemetry.logged" = false;
-                    "toolkit.telemetry.enabled" = false;
-                    "toolkit.telemetry.unified" = false;
-                    "toolkit.telemetry.server" = "";
-
-                    # Disable Pocket
-                    "browser.newtabpage.activity-stream.feeds.discoverystreamfeed" = false;
-                    "browser.newtabpage.activity-stream.feeds.section.topstories" = false;
-                    "browser.newtabpage.activity-stream.section.highlights.includePocket" = false;
-                    "browser.newtabpage.activity-stream.showSponsored" = false;
-                    "extensions.pocket.enabled" = false;
-
-                    # Disable prefetching
-                    "network.dns.disablePrefetch" = true;
-                    "network.prefetch-next" = false;
-
-                    # Disable JS in PDFs
-                    "pdfjs.enableScripting" = false;
-
-                    # Harden SSL 
-                    "security.ssl.require_safe_negotiation" = true;
-
-                    # Extra
-                    "identity.fxaccounts.enabled" = false;
-                    "browser.search.suggest.enabled" = false;
-                    "browser.urlbar.shortcuts.bookmarks" = false;
-                    "browser.urlbar.shortcuts.history" = false;
-                    "browser.urlbar.shortcuts.tabs" = false;
-                    "browser.urlbar.suggest.bookmark" = false;
-                    "browser.urlbar.suggest.engines" = false;
-                    "browser.urlbar.suggest.history" = false;
-                    "browser.urlbar.suggest.openpage" = false;
-                    "browser.urlbar.suggest.topsites" = false;
-                    "browser.uidensity" = 1;
-                    "media.autoplay.enabled" = false;
-                    "toolkit.zoomManager.zoomValues" = ".8,.90,.95,1,1.1,1.2";
-                    
-                    "privacy.firstparty.isolate" = true;
-                    "network.http.sendRefererHeader" = 0;
-                };
-
-                # userChome.css to make it look better
-                userChrome = builtins.readFile ./userChrome.css;
-            };
-        };
-        };
-        };
-    };
-}
diff --git a/modules/firefox/userChrome.css b/modules/firefox/userChrome.css
deleted file mode 100644
index a5a4a4e..0000000
--- a/modules/firefox/userChrome.css
+++ /dev/null
@@ -1,69 +0,0 @@
-* {
-    box-shadow: none !important;
-    border: 0px solid !important;
-}
-
-#tabbrowser-tabs {
-    --user-tab-rounding: 8px;
-}
-
-.tab-background {
-    border-radius: var(--user-tab-rounding) var(--user-tab-rounding) 0px 0px !important;
-    /* Connected */
-    margin-block: 1px 0 !important;
-    /* Connected */
-}
-
-#scrollbutton-up,
-#scrollbutton-down {
-    /* 6/10/2021 */
-    border-top-width: 1px !important;
-    border-bottom-width: 0 !important;
-}
-
-.tab-background:is([selected], [multiselected]):-moz-lwtheme {
-    --lwt-tabs-border-color: rgba(0, 0, 0, 0.5) !important;
-    border-bottom-color: transparent !important;
-}
-
-[brighttext='true'] .tab-background:is([selected], [multiselected]):-moz-lwtheme {
-    --lwt-tabs-border-color: rgba(255, 255, 255, 0.5) !important;
-    border-bottom-color: transparent !important;
-}
-
-/* Container color bar visibility */
-.tabbrowser-tab[usercontextid]>.tab-stack>.tab-background>.tab-context-line {
-    margin: 0px max(calc(var(--user-tab-rounding) - 3px), 0px) !important;
-}
-
-#TabsToolbar,
-#tabbrowser-tabs {
-    --tab-min-height: 29px !important;
-}
-
-#main-window[sizemode='true'] #toolbar-menubar[autohide='true']+#TabsToolbar,
-#main-window[sizemode='true'] #toolbar-menubar[autohide='true']+#TabsToolbar #tabbrowser-tabs {
-    --tab-min-height: 30px !important;
-}
-
-#scrollbutton-up,
-#scrollbutton-down {
-    border-top-width: 0 !important;
-    border-bottom-width: 0 !important;
-}
-
-#TabsToolbar,
-#TabsToolbar>hbox,
-#TabsToolbar-customization-target,
-#tabbrowser-arrowscrollbox {
-    max-height: calc(var(--tab-min-height) + 1px) !important;
-}
-
-#TabsToolbar-customization-target toolbarbutton>.toolbarbutton-icon,
-#TabsToolbar-customization-target .toolbarbutton-text,
-#TabsToolbar-customization-target .toolbarbutton-badge-stack,
-#scrollbutton-up,
-#scrollbutton-down {
-    padding-top: 7px !important;
-    padding-bottom: 6px !important;
-}
\ No newline at end of file
diff --git a/modules/git/default.nix b/modules/git/default.nix
deleted file mode 100644
index b2d9f65..0000000
--- a/modules/git/default.nix
+++ /dev/null
@@ -1,21 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.git;
-
-in {
-    options.modules.git = { enable = mkEnableOption "git"; };
-    config = mkIf cfg.enable {
-        programs.git = {
-            enable = true;
-            userName = "notusknot";
-            userEmail = "notusknot@gmail.com";
-            extraConfig = {
-                init = { defaultBranch = "main"; };
-                core = {
-                    excludesfile = "$NIXOS_CONFIG_DIR/scripts/gitignore";
-                };
-            };
-        };
-    };
-}
diff --git a/modules/hyprland/default.nix b/modules/hyprland/default.nix
deleted file mode 100644
index 5138eb4..0000000
--- a/modules/hyprland/default.nix
+++ /dev/null
@@ -1,15 +0,0 @@
-{ inputs, pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.hyprland;
-
-in {
-    options.modules.hyprland= { enable = mkEnableOption "hyprland"; };
-    config = mkIf cfg.enable {
-	home.packages = with pkgs; [
-	    wofi swaybg wlsunset wl-clipboard hyprland
-	];
-
-        home.file.".config/hypr/hyprland.conf".source = ./hyprland.conf;
-    };
-}
diff --git a/modules/hyprland/hyprland.conf b/modules/hyprland/hyprland.conf
deleted file mode 100644
index bda3854..0000000
--- a/modules/hyprland/hyprland.conf
+++ /dev/null
@@ -1,90 +0,0 @@
-monitor=eDP-1,1920x1080@60,0x0,1
-monitor=eDP-1,addreserved,0,0,48,0
-
-exec-once=swaybg -i $NIXOS_CONFIG_DIR/pics/wallpaper.png
-exec-once=kitty --server
-exec-once=wlsunset -l -23 -L -46
-exec-once=eww daemon
-exec-once=eww open bar
-exec-once=dunst
-
-input {
-    follow_mouse=0
-}
-
-general {
-    sensitivity=1
-    main_mod=ALT
-
-    gaps_in=6
-    gaps_out=12
-    border_size=4
-    col.active_border=0xffb072d1
-    col.inactive_border=0xff292a37
-
-    damage_tracking=full
-}
-
-decoration {
-    rounding=8
-    blur=0
-    drop_shadow=0
-    shadow_range=60
-    col.shadow=0x66000000
-}
-
-animations {
-    enabled=1
-    animation=windows,1,4,default,slide
-    animation=borders,1,5,default
-    animation=fadein,1,5,default
-    animation=workspaces,1,3,default,vertslide
-}
-
-dwindle {
-    pseudotile=0 # enable pseudotiling on dwindle
-}
-
-# example window rules
-# for windows named/classed as abc and xyz
-windowrule=float,move 0 0,pqiv
-windowrule=float,kitty-notes
-#windowrule=size 420 69,abc
-#windowrule=tile,xyz
-#windowrule=float,abc
-#windowrule=pseudo,abc
-#windowrule=monitor 0,xyz
-
-# example binds
-bind=ALT,Return,exec,kittyclient
-bind=ALTSHIFT,Q,killactive,
-bind=ALT,V,togglefloating,
-bind=ALT,R,exec,wofi --show run --xoffset=1670 --yoffset=12 --width=230px --height=984 --style=$HOME/.config/wofi.css --term=kittyclient --prompt=Run
-bind=ALT,F,fullscreen,0
-
-bind=ALT,h,movefocus,l
-bind=ALT,l,movefocus,r
-bind=ALT,k,movefocus,u
-bind=ALT,j,movefocus,d
-
-bind=ALTSHIFT,h,movewindow,l
-bind=ALTSHIFT,l,movewindow,r
-bind=ALTSHIFT,k,movewindow,u
-bind=ALTSHIFT,j,movewindow,d
-
-bind=ALT,1,workspace,1
-bind=ALT,2,workspace,2
-bind=ALT,3,workspace,3
-bind=ALT,4,workspace,4
-bind=ALT,5,workspace,5
-
-bind=ALTSHIFT,exclam,movetoworkspacesilent,1
-bind=ALTSHIFT,at,movetoworkspacesilent,2
-bind=ALTSHIFT,numbersign,movetoworkspacesilent,3
-bind=ALTSHIFT,dollar,movetoworkspacesilent,4
-bind=ALTSHIFT,percent,movetoworkspacesilent,5
-
-bind=,XF86MonBrightnessUp,exec,brightnessctl set +5%
-bind=,XF86MonBrightnessDown,exec,brightnessctl set 5%-
-bind=,XF86AudioRaiseVolume,exec,pamixer -i 5
-bind=,XF86AudioLowerVolume,exec,pamixer -d 5
diff --git a/modules/kitty/default.nix b/modules/kitty/default.nix
deleted file mode 100644
index c8108c8..0000000
--- a/modules/kitty/default.nix
+++ /dev/null
@@ -1,14 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.kitty;
-
-in {
-    options.modules.kitty = { enable = mkEnableOption "kitty"; };
-    config = mkIf cfg.enable {
-        programs.kitty = {
-            enable = true;
-            extraConfig = builtins.readFile ./kitty.conf;
-        };
-    };
-}
diff --git a/modules/kitty/kitty.conf b/modules/kitty/kitty.conf
deleted file mode 100644
index 5629bfa..0000000
--- a/modules/kitty/kitty.conf
+++ /dev/null
@@ -1,243 +0,0 @@
-# vim:fileencoding=utf-8:ft=conf
-
-# Font family. You can also specify different fonts for the
-# bold/italic/bold-italic variants. By default they are derived automatically,
-# by the OSes font system. Setting them manually is useful for font families
-# that have many weight variants like Book, Medium, Thick, etc. For example:
-# font_family Operator Mono Book
-# bold_font Operator Mono Thick
-# bold_italic_font Operator Mono Medium
-# font_family      Input Mono
-font_family      JetBrainsMono Nerdfont
-italic_font      auto
-bold_font        auto
-bold_italic_font auto
-
-# Font size (in pts)
-font_size        12.0
-
-# The foreground color
-foreground       #c0b18b
-
-# The background color
-background       #262626
-
-# The foreground for selections
-selection_foreground #2f2f2f
-
-# The background for selections
-selection_background #d75f5f
-
-# The cursor color
-cursor           #8fee96
-
-# The cursor shape can be one of (block, beam, underline)
-shell_integration no-cursor
-cursor_shape block
-
-# The interval (in seconds) at which to blink the cursor. Set to zero to
-# disable blinking.
-cursor_blink_interval     0.5
-
-# Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to
-# zero or a negative number to never stop blinking.
-cursor_stop_blinking_after 15.0
-
-# Number of lines of history to keep in memory for scrolling back
-scrollback_lines 2000
-
-# Program with which to view scrollback in a new window. The scrollback buffer is passed as
-# STDIN to this program. If you change it, make sure the program you use can
-# handle ANSI escape sequences for colors and text formatting.
-scrollback_pager less +G -R
-
-# Wheel scroll multiplier (modify the amount scrolled by the mouse wheel)
-wheel_scroll_multiplier 5.0
-
-# The interval between successive clicks to detect double/triple clicks (in seconds)
-click_interval 0.5
-
-# Characters considered part of a word when double clicking. In addition to these characters
-# any character that is marked as an alpha-numeric character in the unicode
-# database will be matched.
-select_by_word_characters :@-./_~?&=%+#
-
-# Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to
-# zero or a negative number to disable mouse cursor hiding.
-mouse_hide_wait 0.0
-
-# The enabled window layouts. A comma separated list of layout names. The special value * means
-# all layouts. The first listed layout will be used as the startup layout.
-# For a list of available layouts, see the file layouts.py
-enabled_layouts *
-
-# If enabled, the window size will be remembered so that new instances of kitty will have the same
-# size as the previous instance. If disabled, the window will initially have size configured
-# by initial_window_width/height, in pixels.
-remember_window_size   no
-initial_window_width   640
-initial_window_height  400
-
-# Delay (in milliseconds) between screen updates. Decreasing it, increases fps
-# at the cost of more CPU usage. The default value yields ~100fps which is more
-# that sufficient for most uses.
-# repaint_delay    10
-repaint_delay    10
-
-# Delay (in milliseconds) before input from the program running in the terminal
-# is processed. Note that decreasing it will increase responsiveness, but also
-# increase CPU usage and might cause flicker in full screen programs that
-# redraw the entire screen on each loop, because kitty is so fast that partial
-# screen updates will be drawn.
-input_delay 3
-
-# Visual bell duration. Flash the screen when a bell occurs for the specified number of
-# seconds. Set to zero to disable.
-visual_bell_duration 0.0
-
-# Enable/disable the audio bell. Useful in environments that require silence.
-enable_audio_bell yes
-
-# The modifier keys to press when clicking with the mouse on URLs to open the URL
-open_url_modifiers ctrl+shift
-
-# The program with which to open URLs that are clicked on. The special value "default" means to
-# use the operating system's default URL handler.
-open_url_with default
-
-# The value of the TERM environment variable to set
-term xterm-kitty
-
-# The width (in pts) of window borders. Will be rounded to the nearest number of pixels based on screen resolution.
-window_border_width 0
-
-window_margin_width 15
-
-# The color for the border of the active window
-active_border_color #ffffff
-
-# The color for the border of inactive windows
-inactive_border_color #cccccc
-
-# Tab-bar colors
-active_tab_foreground #000
-active_tab_background #eee
-inactive_tab_foreground #444
-inactive_tab_background #999
-
-
-# The 16 terminal colors. There are 8 basic colors, each color has a dull and
-# bright version.
-
-# black
-color0   #2f2f2f
-color8   #656565
-
-# red
-color1   #d75f5f
-color9   #d75f5f
-
-# green
-color2    #d4d232
-color10   #8fee96
-
-# yellow
-color3    #af865a
-color11   #cd950c
-
-# blue
-color4   #22c3a1
-color12  #22c3a1
-
-# magenta
-color5   #775759
-color13  #775759
-
-# cyan
-color6   #84edb9
-color14  #84edb9
-
-# white
-color7   #c0b18b
-color15  #d8d8d8
-
-# Key mapping
-# For a list of key names, see: http://www.glfw.org/docs/latest/group__keys.html
-# For a list of modifier names, see: http://www.glfw.org/docs/latest/group__mods.html
-# You can use the special action no_op to unmap a keyboard shortcut that is
-# assigned in the default configuration.
-
-# Clipboard
-map super+v             paste_from_clipboard
-map ctrl+shift+s        paste_from_selection
-map super+c             copy_to_clipboard
-map shift+insert        paste_from_selection
-
-# Scrolling
-map ctrl+shift+up        scroll_line_up
-map ctrl+shift+down      scroll_line_down
-map ctrl+shift+k         scroll_line_up
-map ctrl+shift+j         scroll_line_down
-map ctrl+shift+page_up   scroll_page_up
-map ctrl+shift+page_down scroll_page_down
-map ctrl+shift+home      scroll_home
-map ctrl+shift+end       scroll_end
-map ctrl+shift+h         show_scrollback
-
-# Window management
-map super+n             new_os_window
-map super+w             close_window
-map ctrl+shift+enter    new_window
-map ctrl+shift+]        next_window
-map ctrl+shift+[        previous_window
-map ctrl+shift+f        move_window_forward
-map ctrl+shift+b        move_window_backward
-map ctrl+shift+`        move_window_to_top
-map ctrl+shift+1        first_window
-map ctrl+shift+2        second_window
-map ctrl+shift+3        third_window
-map ctrl+shift+4        fourth_window
-map ctrl+shift+5        fifth_window
-map ctrl+shift+6        sixth_window
-map ctrl+shift+7        seventh_window
-map ctrl+shift+8        eighth_window
-map ctrl+shift+9        ninth_window
-map ctrl+shift+0        tenth_window
-
-# Tab management
-map ctrl+shift+right    next_tab
-map ctrl+shift+left     previous_tab
-map ctrl+shift+t        new_tab
-map ctrl+shift+q        close_tab
-map ctrl+shift+l        next_layout
-map ctrl+shift+.        move_tab_forward
-map ctrl+shift+,        move_tab_backward
-
-# Miscellaneous
-map ctrl+shift+up      increase_font_size
-map ctrl+shift+down    decrease_font_size
-map ctrl+shift+backspace restore_font_size
-
-# Symbol mapping (special font for specified unicode code points). Map the
-# specified unicode codepoints to a particular font. Useful if you need special
-# rendering for some symbols, such as for Powerline. Avoids the need for
-# patched fonts. Each unicode code point is specified in the form U+<code point
-# in hexadecimal>. You can specify multiple code points, separated by commas
-# and ranges separated by hyphens. symbol_map itself can be specified multiple times.
-# Syntax is:
-#
-# symbol_map codepoints Font Family Name
-#
-# For example:
-#
-#symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols
-hide_window_decorations titlebar-only
-macos_option_as_alt no
-
-# Change the color of the kitty window's titlebar on macOS. A value of "system"
-# means to use the default system color, a value of "background" means to use
-# the default background color and finally you can use an arbitrary color, such
-# as #12af59 or "red".
-macos_titlebar_color background
-
-allow_remote_control yes
\ No newline at end of file
diff --git a/modules/laptopHardware/default.nix b/modules/laptopHardware/default.nix
deleted file mode 100644
index da4664a..0000000
--- a/modules/laptopHardware/default.nix
+++ /dev/null
@@ -1,11 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.laptopHardware;
-
-in {
-    options.modules.laptopHardware = { enable = mkEnableOption "laptopHardware"; };
-    config = mkIf cfg.enable {
-        
-    };
-}
diff --git a/modules/nushell/config.nu b/modules/nushell/config.nu
deleted file mode 100644
index 2017b7c..0000000
--- a/modules/nushell/config.nu
+++ /dev/null
@@ -1,730 +0,0 @@
-# Nushell Config File
-#
-# version = 0.83.1
-
-# For more information on defining custom themes, see
-# https://www.nushell.sh/book/coloring_and_theming.html
-# And here is the theme collection
-# https://github.com/nushell/nu_scripts/tree/main/themes
-let dark_theme = {
-    # color for nushell primitives
-    separator: white
-    leading_trailing_space_bg: { attr: n } # no fg, no bg, attr none effectively turns this off
-    header: green_bold
-    empty: blue
-    # Closures can be used to choose colors for specific values.
-    # The value (in this case, a bool) is piped into the closure.
-    bool: {|| if $in { 'light_cyan' } else { 'light_gray' } }
-    int: white
-    filesize: {|e|
-        if $e == 0b {
-            'white'
-        } else if $e < 1mb {
-            'cyan'
-        } else { 'blue' }
-    }
-    duration: white
-    date: {|| (date now) - $in |
-        if $in < 1hr {
-            'purple'
-        } else if $in < 6hr {
-            'red'
-        } else if $in < 1day {
-            'yellow'
-        } else if $in < 3day {
-            'green'
-        } else if $in < 1wk {
-            'light_green'
-        } else if $in < 6wk {
-            'cyan'
-        } else if $in < 52wk {
-            'blue'
-        } else { 'dark_gray' }
-    }
-    range: white
-    float: white
-    string: white
-    nothing: white
-    binary: white
-    cellpath: white
-    row_index: green_bold
-    record: white
-    list: white
-    block: white
-    hints: dark_gray
-    search_result: {bg: red fg: white}    
-    shape_and: purple_bold
-    shape_binary: purple_bold
-    shape_block: blue_bold
-    shape_bool: light_cyan
-    shape_closure: green_bold
-    shape_custom: green
-    shape_datetime: cyan_bold
-    shape_directory: cyan
-    shape_external: cyan
-    shape_externalarg: green_bold
-    shape_filepath: cyan
-    shape_flag: blue_bold
-    shape_float: purple_bold
-    # shapes are used to change the cli syntax highlighting
-    shape_garbage: { fg: white bg: red attr: b}
-    shape_globpattern: cyan_bold
-    shape_int: purple_bold
-    shape_internalcall: cyan_bold
-    shape_list: cyan_bold
-    shape_literal: blue
-    shape_match_pattern: green
-    shape_matching_brackets: { attr: u }
-    shape_nothing: light_cyan
-    shape_operator: yellow
-    shape_or: purple_bold
-    shape_pipe: purple_bold
-    shape_range: yellow_bold
-    shape_record: cyan_bold
-    shape_redirection: purple_bold
-    shape_signature: green_bold
-    shape_string: green
-    shape_string_interpolation: cyan_bold
-    shape_table: blue_bold
-    shape_variable: purple
-    shape_vardecl: purple
-}
-
-
-# External completer example
-# let carapace_completer = {|spans|
-#     carapace $spans.0 nushell $spans | from json
-# }
-
-
-# The default config record. This is where much of your global configuration is setup.
-$env.config = {
-    show_banner: false # true or false to enable or disable the welcome banner at startup
-
-    ls: {
-        use_ls_colors: true # use the LS_COLORS environment variable to colorize output
-        clickable_links: true # enable or disable clickable links. Your terminal has to support links.
-    }
-
-    rm: {
-        always_trash: false # always act as if -t was given. Can be overridden with -p
-    }
-
-
-    table: {
-        mode: rounded # basic, compact, compact_double, light, thin, with_love, rounded, reinforced, heavy, none, other
-        index_mode: always # "always" show indexes, "never" show indexes, "auto" = show indexes when a table has "index" column
-        show_empty: true # show 'empty list' and 'empty record' placeholders for command output
-        trim: {
-            methodology: wrapping # wrapping or truncating
-            wrapping_try_keep_words: true # A strategy used by the 'wrapping' methodology
-            truncating_suffix: "..." # A suffix used by the 'truncating' methodology
-        }
-    }
-
-    # datetime_format determines what a datetime rendered in the shell would look like.
-    # Behavior without this configuration point will be to "humanize" the datetime display,
-    # showing something like "a day ago."
-    datetime_format: {
-        # normal: '%a, %d %b %Y %H:%M:%S %z'    # shows up in displays of variables or other datetime's outside of tables
-        # table: '%m/%d/%y %I:%M:%S%p'          # generally shows up in tabular outputs such as ls. commenting this out will change it to the default human readable datetime format
-    }
-
-    explore: {
-        try: {
-            border_color: {fg: "white"}
-        },
-        status_bar_background: {fg: "#1D1F21", bg: "#C4C9C6"},
-        command_bar_text: {fg: "#C4C9C6"},
-        highlight: {fg: "black", bg: "yellow"},
-        status: {
-            error: {fg: "white", bg: "red"},
-            warn: {}
-            info: {}
-        },
-        table: {
-            split_line: {fg: "#404040"},
-            selected_cell: {},
-            selected_row: {},
-            selected_column: {},
-            cursor: true,
-            line_head_top: true,
-            line_head_bottom: true,
-            line_shift: true,
-            line_index: true,
-        },
-        config: {
-            border_color: {fg: "white"}
-            cursor_color: {fg: "black", bg: "light_yellow"}
-        },
-    }
-
-    history: {
-        max_size: 100_000 # Session has to be reloaded for this to take effect
-        sync_on_enter: false # Enable to share history between multiple sessions, else you have to close the session to write history to file
-        file_format: "plaintext" # "sqlite" or "plaintext"
-        isolation: false # only available with sqlite file_format. true enables history isolation, false disables it. true will allow the history to be isolated to the current session using up/down arrows. false will allow the history to be shared across all sessions.
-    }
-
-    completions: {
-        case_sensitive: false # set to true to enable case-sensitive completions
-        quick: true    # set this to false to prevent auto-selecting completions when only one remains
-        partial: true    # set this to false to prevent partial filling of the prompt
-        algorithm: "fuzzy"    # prefix or fuzzy
-        external: {
-            enable: true # set to false to prevent nushell looking into $env.PATH to find more suggestions, `false` recommended for WSL users as this look up may be very slow
-            max_results: 100 # setting it lower can improve completion performance at the cost of omitting some options
-            completer: null # check 'carapace_completer' above as an example
-        }
-    }
-
-    filesize: {
-        metric: true # true => KB, MB, GB (ISO standard), false => KiB, MiB, GiB (Windows standard)
-        format: "auto" # b, kb, kib, mb, mib, gb, gib, tb, tib, pb, pib, eb, eib, auto
-    }
-
-    cursor_shape: {
-        emacs: line # block, underscore, line, blink_block, blink_underscore, blink_line (line is the default)
-        vi_insert: line # block, underscore, line , blink_block, blink_underscore, blink_line (block is the default)
-        vi_normal: block # block, underscore, line, blink_block, blink_underscore, blink_line (underscore is the default)
-    }
-
-    color_config: {} # if you want a more interesting theme, you can replace the empty record with `$dark_theme`, `$light_theme` or another custom record
-    use_grid_icons: true
-    footer_mode: "25" # always, never, number_of_rows, auto
-    float_precision: 2 # the precision for displaying floats in tables
-    buffer_editor: "" # command that will be used to edit the current line buffer with ctrl+o, if unset fallback to $env.EDITOR and $env.VISUAL
-    use_ansi_coloring: true
-    bracketed_paste: true # enable bracketed paste, currently useless on windows
-    edit_mode: emacs # emacs, vi
-    shell_integration: false # enables terminal shell integration. Off by default, as some terminals have issues with this.
-    render_right_prompt_on_last_line: false # true or false to enable or disable right prompt to be rendered on last line of the prompt.
-
-    hooks: {
-        pre_prompt: [{ null }] # run before the prompt is shown
-        pre_execution: [{ null }] # run before the repl input is run
-        env_change: {
-            PWD: [{|before, after| null }] # run if the PWD environment is different since the last repl input
-        }
-        display_output: { 
-            if (term size).columns >= 80 {
-                table -e
-            } else {
-                table
-            }
-        } 
-        command_not_found: { null } # return an error message when a command is not found
-    }
-
-    menus: [
-        # Configuration for default nushell menus
-        # Note the lack of source parameter
-        {
-            name: completion_menu
-            only_buffer_difference: false
-            marker: "| "
-            type: {
-                layout: columnar
-                columns: 4
-                col_width: 20     # Optional value. If missing all the screen width is used to calculate column width
-                col_padding: 2
-            }
-            style: {
-                text: green
-                selected_text: green_reverse
-                description_text: yellow
-            }
-        }
-        {
-            name: history_menu
-            only_buffer_difference: true
-            marker: "? "
-            type: {
-                layout: list
-                page_size: 10
-            }
-            style: {
-                text: green
-                selected_text: green_reverse
-                description_text: yellow
-            }
-        }
-        {
-            name: help_menu
-            only_buffer_difference: true
-            marker: "? "
-            type: {
-                layout: description
-                columns: 4
-                col_width: 20     # Optional value. If missing all the screen width is used to calculate column width
-                col_padding: 2
-                selection_rows: 4
-                description_rows: 10
-            }
-            style: {
-                text: green
-                selected_text: green_reverse
-                description_text: yellow
-            }
-        }
-    ]
-
-    keybindings: [
-        {
-            name: completion_menu
-            modifier: none
-            keycode: tab
-            mode: [emacs vi_normal vi_insert]
-            event: {
-                until: [
-                    { send: menu name: completion_menu }
-                    { send: menunext }
-                ]
-            }
-        }
-        {
-            name: history_menu
-            modifier: control
-            keycode: char_r
-            mode: [emacs, vi_insert, vi_normal]
-            event: { send: menu name: history_menu }
-        }
-        {
-            name: help_menu
-            modifier: none
-            keycode: f1
-            mode: [emacs, vi_insert, vi_normal]
-            event: { send: menu name: help_menu }
-        }
-        {
-            name: completion_previous_menu
-            modifier: shift
-            keycode: backtab
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: menuprevious }
-        }
-        {
-            name: next_page_menu
-            modifier: control
-            keycode: char_x
-            mode: emacs
-            event: { send: menupagenext }
-        }
-        {
-            name: undo_or_previous_page_menu
-            modifier: control
-            keycode: char_z
-            mode: emacs
-            event: {
-                until: [
-                    { send: menupageprevious }
-                    { edit: undo }
-                ]
-            }
-        }
-        {
-            name: escape
-            modifier: none
-            keycode: escape
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: esc }    # NOTE: does not appear to work
-        }
-        {
-            name: cancel_command
-            modifier: control
-            keycode: char_c
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: ctrlc }
-        }
-        {
-            name: quit_shell
-            modifier: control
-            keycode: char_d
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: ctrld }
-        }
-        {
-            name: clear_screen
-            modifier: control
-            keycode: char_l
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: clearscreen }
-        }
-        {
-            name: search_history
-            modifier: control
-            keycode: char_r
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: searchhistory }
-        }
-        {
-            name: open_command_editor
-            modifier: control
-            keycode: char_o
-            mode: [emacs, vi_normal, vi_insert]
-            event: { send: openeditor }
-        }
-        {
-            name: move_up
-            modifier: none
-            keycode: up
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menuup}
-                    {send: up}
-                ]
-            }
-        }
-        {
-            name: move_down
-            modifier: none
-            keycode: down
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menudown}
-                    {send: down}
-                ]
-            }
-        }
-        {
-            name: move_left
-            modifier: none
-            keycode: left
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menuleft}
-                    {send: left}
-                ]
-            }
-        }
-        {
-            name: move_right_or_take_history_hint
-            modifier: none
-            keycode: right
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: historyhintcomplete}
-                    {send: menuright}
-                    {send: right}
-                ]
-            }
-        }
-        {
-            name: move_one_word_left
-            modifier: control
-            keycode: left
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movewordleft}
-        }
-        {
-            name: move_one_word_right_or_take_history_hint
-            modifier: control
-            keycode: right
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: historyhintwordcomplete}
-                    {edit: movewordright}
-                ]
-            }
-        }
-        {
-            name: move_to_line_start
-            modifier: none
-            keycode: home
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movetolinestart}
-        }
-        {
-            name: move_to_line_start
-            modifier: control
-            keycode: char_a
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movetolinestart}
-        }
-        {
-            name: move_to_line_end_or_take_history_hint
-            modifier: none
-            keycode: end
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: historyhintcomplete}
-                    {edit: movetolineend}
-                ]
-            }
-        }
-        {
-            name: move_to_line_end_or_take_history_hint
-            modifier: control
-            keycode: char_e
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: historyhintcomplete}
-                    {edit: movetolineend}
-                ]
-            }
-        }
-        {
-            name: move_to_line_start
-            modifier: control
-            keycode: home
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movetolinestart}
-        }
-        {
-            name: move_to_line_end
-            modifier: control
-            keycode: end
-            mode: [emacs, vi_normal, vi_insert]
-            event: {edit: movetolineend}
-        }
-        {
-            name: move_up
-            modifier: control
-            keycode: char_p
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menuup}
-                    {send: up}
-                ]
-            }
-        }
-        {
-            name: move_down
-            modifier: control
-            keycode: char_t
-            mode: [emacs, vi_normal, vi_insert]
-            event: {
-                until: [
-                    {send: menudown}
-                    {send: down}
-                ]
-            }
-        }
-        {
-            name: delete_one_character_backward
-            modifier: none
-            keycode: backspace
-            mode: [emacs, vi_insert]
-            event: {edit: backspace}
-        }
-        {
-            name: delete_one_word_backward
-            modifier: control
-            keycode: backspace
-            mode: [emacs, vi_insert]
-            event: {edit: backspaceword}
-        }
-        {
-            name: delete_one_character_forward
-            modifier: none
-            keycode: delete
-            mode: [emacs, vi_insert]
-            event: {edit: delete}
-        }
-        {
-            name: delete_one_character_forward
-            modifier: control
-            keycode: delete
-            mode: [emacs, vi_insert]
-            event: {edit: delete}
-        }
-        {
-            name: delete_one_character_forward
-            modifier: control
-            keycode: char_h
-            mode: [emacs, vi_insert]
-            event: {edit: backspace}
-        }
-        {
-            name: delete_one_word_backward
-            modifier: control
-            keycode: char_w
-            mode: [emacs, vi_insert]
-            event: {edit: backspaceword}
-        }
-        {
-            name: move_left
-            modifier: none
-            keycode: backspace
-            mode: vi_normal
-            event: {edit: moveleft}
-        }
-        {
-            name: newline_or_run_command
-            modifier: none
-            keycode: enter
-            mode: emacs
-            event: {send: enter}
-        }
-        {
-            name: move_left
-            modifier: control
-            keycode: char_b
-            mode: emacs
-            event: {
-                until: [
-                    {send: menuleft}
-                    {send: left}
-                ]
-            }
-        }
-        {
-            name: move_right_or_take_history_hint
-            modifier: control
-            keycode: char_f
-            mode: emacs
-            event: {
-                until: [
-                    {send: historyhintcomplete}
-                    {send: menuright}
-                    {send: right}
-                ]
-            }
-        }
-        {
-            name: redo_change
-            modifier: control
-            keycode: char_g
-            mode: emacs
-            event: {edit: redo}
-        }
-        {
-            name: undo_change
-            modifier: control
-            keycode: char_z
-            mode: emacs
-            event: {edit: undo}
-        }
-        {
-            name: paste_before
-            modifier: control
-            keycode: char_y
-            mode: emacs
-            event: {edit: pastecutbufferbefore}
-        }
-        {
-            name: cut_word_left
-            modifier: control
-            keycode: char_w
-            mode: emacs
-            event: {edit: cutwordleft}
-        }
-        {
-            name: cut_line_to_end
-            modifier: control
-            keycode: char_k
-            mode: emacs
-            event: {edit: cuttoend}
-        }
-        {
-            name: cut_line_from_start
-            modifier: control
-            keycode: char_u
-            mode: emacs
-            event: {edit: cutfromstart}
-        }
-        {
-            name: swap_graphemes
-            modifier: control
-            keycode: char_t
-            mode: emacs
-            event: {edit: swapgraphemes}
-        }
-        {
-            name: move_one_word_left
-            modifier: alt
-            keycode: left
-            mode: emacs
-            event: {edit: movewordleft}
-        }
-        {
-            name: move_one_word_right_or_take_history_hint
-            modifier: alt
-            keycode: right
-            mode: emacs
-            event: {
-                until: [
-                    {send: historyhintwordcomplete}
-                    {edit: movewordright}
-                ]
-            }
-        }
-        {
-            name: move_one_word_left
-            modifier: alt
-            keycode: char_b
-            mode: emacs
-            event: {edit: movewordleft}
-        }
-        {
-            name: move_one_word_right_or_take_history_hint
-            modifier: alt
-            keycode: char_f
-            mode: emacs
-            event: {
-                until: [
-                    {send: historyhintwordcomplete}
-                    {edit: movewordright}
-                ]
-            }
-        }
-        {
-            name: delete_one_word_forward
-            modifier: alt
-            keycode: delete
-            mode: emacs
-            event: {edit: deleteword}
-        }
-        {
-            name: delete_one_word_backward
-            modifier: alt
-            keycode: backspace
-            mode: emacs
-            event: {edit: backspaceword}
-        }
-        {
-            name: delete_one_word_backward
-            modifier: alt
-            keycode: char_m
-            mode: emacs
-            event: {edit: backspaceword}
-        }
-        {
-            name: cut_word_to_right
-            modifier: alt
-            keycode: char_d
-            mode: emacs
-            event: {edit: cutwordright}
-        }
-        {
-            name: upper_case_word
-            modifier: alt
-            keycode: char_u
-            mode: emacs
-            event: {edit: uppercaseword}
-        }
-        {
-            name: lower_case_word
-            modifier: alt
-            keycode: char_l
-            mode: emacs
-            event: {edit: lowercaseword}
-        }
-        {
-            name: capitalize_char
-            modifier: alt
-            keycode: char_c
-            mode: emacs
-            event: {edit: capitalizechar}
-        }
-    ]
-}
-
diff --git a/modules/nushell/default.nix b/modules/nushell/default.nix
deleted file mode 100644
index 7d46a87..0000000
--- a/modules/nushell/default.nix
+++ /dev/null
@@ -1,16 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.nushell;
-
-in {
-    options.modules.nushell = { enable = mkEnableOption "nushell"; };
-    config = mkIf cfg.enable {
-        programs.nushell = {
-            enable = true;
-            configFile.source = ./config.nu;
-            envFile.source = ./env.nu;
-            extraConfig = builtins.readFile ./extra.nu;
-        };
-    };
-}
diff --git a/modules/nushell/env.nu b/modules/nushell/env.nu
deleted file mode 100644
index 51ed547..0000000
--- a/modules/nushell/env.nu
+++ /dev/null
@@ -1,82 +0,0 @@
-# Nushell Environment Config File
-#
-# version = 0.83.1
-
-def create_left_prompt [] {
-    mut home = ""
-    try {
-        if $nu.os-info.name == "windows" {
-            $home = $env.USERPROFILE
-        } else {
-            $home = $env.HOME
-        }
-    }
-
-    let dir = ([
-        ($env.PWD | str substring 0..($home | str length) | str replace $home "~"),
-        ($env.PWD | str substring ($home | str length)..)
-    ] | str join)
-
-    let path_color = (if (is-admin) { ansi red_bold } else { ansi green_bold })
-    let separator_color = (if (is-admin) { ansi light_red_bold } else { ansi light_green_bold })
-    let path_segment = $"($path_color)($dir)"
-
-    $path_segment | str replace --all (char path_sep) $"($separator_color)/($path_color)"
-}
-
-def create_right_prompt [] {
-    # create a right prompt in magenta with green separators and am/pm underlined
-    let time_segment = ([
-        (ansi reset)
-        (ansi magenta)
-        (date now | date format '%Y/%m/%d %r')
-    ] | str join | str replace --all "([/:])" $"(ansi green)${1}(ansi magenta)" |
-        str replace --all "([AP]M)" $"(ansi magenta_underline)${1}")
-
-    let last_exit_code = if ($env.LAST_EXIT_CODE != 0) {([
-        (ansi rb)
-        ($env.LAST_EXIT_CODE)
-    ] | str join)
-    } else { "" }
-
-    ([$last_exit_code, (char space), $time_segment] | str join)
-}
-
-# Use nushell functions to define your right and left prompt
-$env.PROMPT_COMMAND = {|| create_left_prompt }
-# $env.PROMPT_COMMAND_RIGHT = {|| create_right_prompt }
-
-# The prompt indicators are environmental variables that represent
-# the state of the prompt
-$env.PROMPT_INDICATOR = {|| " > " }
-$env.PROMPT_INDICATOR_VI_INSERT = {|| " : " }
-$env.PROMPT_INDICATOR_VI_NORMAL = {|| " > " }
-$env.PROMPT_MULTILINE_INDICATOR = {|| "::: " }
-
-# Specifies how environment variables are:
-# - converted from a string to a value on Nushell startup (from_string)
-# - converted from a value back to a string when running external commands (to_string)
-# Note: The conversions happen *after* config.nu is loaded
-$env.ENV_CONVERSIONS = {
-    "PATH": {
-        from_string: { |s| $s | split row (char esep) | path expand --no-symlink }
-        to_string: { |v| $v | path expand --no-symlink | str join (char esep) }
-    }
-    "Path": {
-        from_string: { |s| $s | split row (char esep) | path expand --no-symlink }
-        to_string: { |v| $v | path expand --no-symlink | str join (char esep) }
-    }
-}
-
-# Directories to search for scripts when calling source or use
-$env.NU_LIB_DIRS = [
-    # ($nu.default-config-dir | path join 'scripts') # add <nushell-config-dir>/scripts
-]
-
-# Directories to search for plugin binaries when calling register
-$env.NU_PLUGIN_DIRS = [
-    # ($nu.default-config-dir | path join 'plugins') # add <nushell-config-dir>/plugins
-]
-
-# To add entries to PATH (on Windows you might use Path), you can use the following pattern:
-# $env.PATH = ($env.PATH | split row (char esep) | prepend '/some/path')
diff --git a/modules/nushell/extra.nu b/modules/nushell/extra.nu
deleted file mode 100644
index 0d58793..0000000
--- a/modules/nushell/extra.nu
+++ /dev/null
@@ -1,16 +0,0 @@
-#source ~/.cache/starship/init.nu
-#source ~/.zoxide.nu
-#alias cringe = sudo bootctl set-oneshot auto-windows
-#alias fetch = neofetch
-#alias ff = firefox
-#alias gc = sudo nix-collect-garbage -d
-#alias js = jj status
-#alias jd = jj diff
-#alias pu = pueue
-#alias rb = sudo nice -n19 nixos-rebuild boot --flake ~/projects/NOflake/
-#alias rs = sudo nice -n19 nixos-rebuild switch --flake ~/projects/NOflake/
-#alias t = task
-#alias ts = tailscale
-#alias tss = tailscale status
-#alias tsx = tailscale exit-node list
-#alias zl = zellij
diff --git a/modules/nvim/default.nix b/modules/nvim/default.nix
deleted file mode 100644
index a5013bd..0000000
--- a/modules/nvim/default.nix
+++ /dev/null
@@ -1,97 +0,0 @@
-{  lib, config, pkgs, ... }:
-with lib;
-let
-    cfg = config.modules.nvim;
-    # Source my theme
-    jabuti-nvim = pkgs.vimUtils.buildVimPlugin {
-        name = "jabuti-nvim";
-        src = pkgs.fetchFromGitHub {
-            owner = "jabuti-theme";
-            repo = "jabuti-nvim";
-            rev = "17f1b94cbf1871a89cdc264e4a8a2b3b4f7c76d2";
-            sha256 = "sha256-iPjwx/rTd98LUPK1MUfqKXZhQ5NmKx/rN8RX1PIuDFA=";
-        };
-    };
-in {
-    options.modules.nvim = { enable = mkEnableOption "nvim"; };
-    config = mkIf cfg.enable {
-
-        home.file.".config/nvim/settings.lua".source = ./init.lua;
-        
-        home.packages = with pkgs; [
-            nixfmt # Nix
-            sumneko-lua-language-server stylua # Lua
-        ];
-
-        programs.nushell = {
-            initExtra = ''
-                export EDITOR="nvim"
-            '';
-
-            shellAliases = {
-                v = "nvim -i NONE";
-                nvim = "nvim -i NONE";
-            };
-        };
-
-        programs.neovim = {
-            enable = true;
-            plugins = with pkgs.vimPlugins; [ 
-                vim-nix
-                plenary-nvim
-                {
-                    plugin = zk-nvim;
-                    config = "require('zk').setup()";
-                }
-                {
-                    plugin = jabuti-nvim;
-                    config = "colorscheme jabuti";
-                }
-                {
-                    plugin = impatient-nvim;
-                    config = "lua require('impatient')";
-                }
-                {
-                    plugin = lualine-nvim;
-                    config = "lua require('lualine').setup()";
-                }
-                {
-                    plugin = telescope-nvim;
-                    config = "lua require('telescope').setup()";
-                }
-                {
-                    plugin = indent-blankline-nvim;
-                    config = "lua require('indent_blankline').setup()";
-                }
-                {
-                    plugin = nvim-lspconfig;
-                    config = ''
-                        lua << EOF
-                        require('lspconfig').rust_analyzer.setup{}
-                        require('lspconfig').sumneko_lua.setup{}
-                        require('lspconfig').rnix.setup{}
-                        require('lspconfig').zk.setup{}
-                        EOF
-                    '';
-                }
-                {
-                    plugin = nvim-treesitter;
-                    config = ''
-                    lua << EOF
-                    require('nvim-treesitter.configs').setup {
-                        highlight = {
-                            enable = true,
-                            additional_vim_regex_highlighting = false,
-                        },
-                    }
-                    EOF
-                    '';
-                }
-            ];
-
-            extraConfig = ''
-                luafile ~/.config/nvim/settings.lua
-            '';
-        };
-    };
-}
diff --git a/modules/nvim/init.lua b/modules/nvim/init.lua
deleted file mode 100644
index 4da3afa..0000000
--- a/modules/nvim/init.lua
+++ /dev/null
@@ -1,83 +0,0 @@
-local o = vim.opt
-local g = vim.g
-
--- Autocmds
-vim.cmd [[
-augroup CursorLine
-    au!
-    au VimEnter * setlocal cursorline
-    au WinEnter * setlocal cursorline
-    au BufWinEnter * setlocal cursorline
-    au WinLeave * setlocal nocursorline
-augroup END
-
-autocmd FileType nix setlocal shiftwidth=4
-]]
-
--- Keybinds
-local map = vim.api.nvim_set_keymap
-local opts = { silent = true, noremap = true }
-
-map("n", "<C-h>", "<C-w>h", opts)
-map("n", "<C-j>", "<C-w>j", opts)
-map("n", "<C-k>", "<C-w>k", opts)
-map("n", "<C-l>", "<C-w>l", opts)
-map('n', '<C-n>', ':Telescope live_grep <CR>', opts)
-map('n', '<C-f>', ':Telescope find_files <CR>', opts)
-map('n', 'j', 'gj', opts)
-map('n', 'k', 'gk', opts)
-map('n', ';', ':', { noremap = true } )
-
-g.mapleader = ' '
-
--- Performance
-o.lazyredraw = true;
-o.shell = "nushell"
-o.shadafile = "NONE"
-
--- Colors
-o.termguicolors = true
-
--- Undo files
-o.undofile = true
-
--- Indentation
-o.smartindent = true
-o.tabstop = 4
-o.shiftwidth = 4
-o.shiftround = true
-o.expandtab = true
-o.scrolloff = 3
-
--- Set clipboard to use system clipboard
-o.clipboard = "unnamedplus"
-
--- Use mouse
-o.mouse = "a"
-
--- Nicer UI settings
-o.cursorline = true
-o.relativenumber = true
-o.number = true
-
--- Get rid of annoying viminfo file
-o.viminfo = ""
-o.viminfofile = "NONE"
-
--- Miscellaneous quality of life
-o.ignorecase = true
-o.ttimeoutlen = 5
-o.hidden = true
-o.shortmess = "atI"
-o.wrap = false
-o.backup = false
-o.writebackup = false
-o.errorbells = false
-o.swapfile = false
-o.showmode = false
-o.laststatus = 3
-o.pumheight = 6
-o.splitright = true
-o.splitbelow = true
-o.completeopt = "menuone,noselect"
-
diff --git a/modules/packages/default.nix b/modules/packages/default.nix
deleted file mode 100644
index 0a09f31..0000000
--- a/modules/packages/default.nix
+++ /dev/null
@@ -1,28 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = 
-    config.modules.packages;
-    screen = pkgs.writeShellScriptBin "screen" ''${builtins.readFile ./screen}'';
-    bandw = pkgs.writeShellScriptBin "bandw" ''${builtins.readFile ./bandw}'';
-    maintenance = pkgs.writeShellScriptBin "maintenance" ''${builtins.readFile ./maintenance}'';
-
-in {
-    options.modules.packages = { enable = mkEnableOption "packages"; };
-    config = mkIf cfg.enable {
-    	home.packages = with pkgs; [
-            # nix
-            nil
-            alejandra
-            # cli tools
-            bat
-            eza
-            fzf
-            ripgrep
-            unzip
-            tealdeer
-            ffmpeg
-            btop
-        ];
-    };
-}
diff --git a/modules/packages/maintenance b/modules/packages/maintenance
deleted file mode 100755
index 4d10d6d..0000000
--- a/modules/packages/maintenance
+++ /dev/null
@@ -1,8 +0,0 @@
-sudo nix-collect-garbage -d
-sudo nix store verify --all
-sudo nix store repair --all
-cd $NIXOS_CONFIG_DIR 
-nix flake update
-sudo nixos-rebuild switch --flake . --upgrade
-nix run nixpkgs#bleachbit
-nix run nixpkgs#pcmanfm
diff --git a/modules/system/configuration.nix b/modules/system/configuration.nix
deleted file mode 100755
index 7d80d8d..0000000
--- a/modules/system/configuration.nix
+++ /dev/null
@@ -1,160 +0,0 @@
-{ config, pkgs, inputs, ... }:
-
-{
-    # Remove unecessary preinstalled packages
-    environment.defaultPackages = [ ];
-    services.xserver.desktopManager.xterm.enable = false;
-
-    programs.nushell.enable = true;
-
-    # Laptop-specific packages (the other ones are installed in `packages.nix`)
-    environment.systemPackages = with pkgs; [
-        acpi tlp git
-    ];
-
-    # Install fonts
-    fonts = {
-        packages = with pkgs; [
-            jetbrains-mono
-            roboto
-            openmoji-color
-            (nerdfonts.override { fonts = [ "JetBrainsMono" ]; })
-        ];
-
-        fontconfig = {
-            hinting.autohint = true;
-            defaultFonts = {
-              emoji = [ "OpenMoji Color" ];
-            };
-        };
-    };
-
-
-    # Wayland stuff: enable XDG integration, allow sway to use brillo
-xdg = {
-    portal = {
-        enable = true;
-        extraPortals = with pkgs; [
-            xdg-desktop-portal-wlr
-            xdg-desktop-portal-gtk
-        ];
-        config = {
-            common = {
-                default = "gtk";
-            };
-            preferred = {
-                "org.freedesktop.impl.portal.Screencast" = "wlr";
-            };
-        };
-    };
-};
-
-
-    # Nix settings, auto cleanup and enable flakes
-    nix = {
-        settings.auto-optimise-store = true;
-        settings.allowed-users = [ "jet" ];
-        gc = {
-            automatic = true;
-            dates = "weekly";
-            options = "--delete-older-than 7d";
-        };
-        extraOptions = ''
-            experimental-features = nix-command flakes
-            keep-outputs = true
-            keep-derivations = true
-        '';
-    };
-
-    # Boot settings: clean /tmp/, latest kernel and enable bootloader
-    boot = {
-        tmp.cleanOnBoot = true;
-        loader = {
-        systemd-boot.enable = true;
-        systemd-boot.editor = false;
-        efi.canTouchEfiVariables = true;
-        timeout = 0;
-        };
-    };
-
-    # Set up locales (timezone and keyboard layout)
-    time.timeZone = "America/Los_Angeles";
-    i18n.defaultLocale = "en_US.UTF-8";
-    console = {
-        font = "Lat2-Terminus16";
-        keyMap = "us";
-    };
-
-    # Set up user and enable sudo
-    users.users.jet = {
-        isNormalUser = true;
-        extraGroups = [ "input" "wheel" "networkmanager"];
-        shell = pkgs.nushell;
-    };
-
-    # Set up networking and secure it
-    networking = {
-        # Enable networking
-        networkmanager.enable = true;
-        firewall = {
-            #enable = true;
-            #allowedTCPPorts = [ 443 80 ];
-            #allowedUDPPorts = [ 443 80 44857 ];
-            #allowPing = false;
-        };
-    };
-
-    # Set environment variables
-    environment.variables = {
-        NIXOS_CONFIG = "$HOME/.config/nixos/configuration.nix";
-        NIXOS_CONFIG_DIR = "$HOME/.config/nixos/";
-        XDG_DATA_HOME = "$HOME/.local/share";
-        PASSWORD_STORE_DIR = "$HOME/.local/share/password-store";
-        GTK_RC_FILES = "$HOME/.local/share/gtk-1.0/gtkrc";
-        GTK2_RC_FILES = "$HOME/.local/share/gtk-2.0/gtkrc";
-        MOZ_ENABLE_WAYLAND = "1";
-        ZK_NOTEBOOK_DIR = "$HOME/stuff/notes/";
-        EDITOR = "nvim";
-        DIRENV_LOG_FORMAT = "";
-        ANKI_WAYLAND = "1";
-        DISABLE_QT5_COMPAT = "0";
-        GTK_USE_PORTAL = "1";
-    };
-
-    # Security 
-    security = {
-        # Extra security
-        protectKernelImage = true;
-    };
-  # Allow unfree package
-  nixpkgs.config.allowUnfree = true;
-
-      # Enable sound with pipewire.
-    sound.enable = true;
-    hardware.pulseaudio.enable = false;
-    security.rtkit.enable = true;
-    services.pipewire = {
-      enable = true;
-      alsa.enable = true;
-      alsa.support32Bit = true;
-      pulse.enable = true;
-      # If you want to use JACK applications, uncomment this
-      jack.enable = true;
-
-      # use the example session manager (no others are packaged yet so this is enabled by default,
-      # no need to redefine it in your config for now)
-      #media-session.enable = true;
-  };
-
-    # enable pulseaudio, enable opengl (for Wayland)
-    hardware = {
-        bluetooth.enable = true;
-        opengl = {
-            enable = true;
-            driSupport = true;
-        };
-    };
-
-    # Do not touch
-    system.stateVersion = "23.11";
-}
diff --git a/modules/template.nix b/modules/template.nix
deleted file mode 100644
index ce7f29b..0000000
--- a/modules/template.nix
+++ /dev/null
@@ -1,10 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.PROGRAM;
-
-in {
-    options.modules.PROGRAM = { enable = mkEnableOption "PROGRAM"; };
-    config = mkIf cfg.enable {
-    };
-}
diff --git a/modules/wofi/default.nix b/modules/wofi/default.nix
deleted file mode 100644
index 956dc36..0000000
--- a/modules/wofi/default.nix
+++ /dev/null
@@ -1,11 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.wofi;
-
-in {
-    options.modules.wofi = { enable = mkEnableOption "wofi"; };
-    config = mkIf cfg.enable {
-        home.file.".config/wofi.css".source = ./wofi.css;
-    };
-}
diff --git a/modules/wofi/wofi.css b/modules/wofi/wofi.css
deleted file mode 100644
index 6f2ca04..0000000
--- a/modules/wofi/wofi.css
+++ /dev/null
@@ -1,35 +0,0 @@
-* {
-    all: unset;
-    font-family: "JetBrainsMono";
-    font-size: 16px;
-}
-
-#window {
-    background-color: #292a37;
-    border-radius: 12px;
-}
-
-#outer-box {
-    background-color: #292a37;
-    border: 4px solid #44465c;
-    border-radius: 12px;
-}
-
-#input{
-    margin: 1rem;
-    padding: 0.5rem;
-    border-radius: 10px;
-    background-color: #303241;
-}
-
-#entry {
-    margin: 0.25rem 0.75rem 0.25rem 0.75rem;
-    padding: 0.25rem 0.75rem 0.25rem 0.75rem;
-    color: #9699b7;
-    border-radius: 8px;
-}
-
-#entry:selected {
-    background-color: #303241;
-    color: #d9e0ee;
-}
diff --git a/modules/xdg/default.nix b/modules/xdg/default.nix
deleted file mode 100644
index 82109b0..0000000
--- a/modules/xdg/default.nix
+++ /dev/null
@@ -1,21 +0,0 @@
-{ pkgs, lib, config, ... }:
-
-with lib;
-let cfg = config.modules.xdg;
-
-in {
-    options.modules.xdg = { enable = mkEnableOption "xdg"; };
-    config = mkIf cfg.enable {
-        xdg.userDirs = {
-            enable = true;
-            documents = "$HOME/stuff/other/";
-            download = "$HOME/stuff/other/";
-            videos = "$HOME/stuff/other/";
-            music = "$HOME/stuff/music/";
-            pictures = "$HOME/stuff/pictures/";
-            desktop = "$HOME/stuff/other/";
-            publicShare = "$HOME/stuff/other/";
-            templates = "$HOME/stuff/other/";
-        };
-    };
-}